Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ULTRAMID® C 52G4 MZ25 WHITE R9003
- Product Form
- POLYAMIDE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polymer, for industrial processing only
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-0
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation based on: polyamide (PA 6), additives, fillers, flame retardant, nitrogenous compounds
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, compound with 1,3,5-triazine-2,4,6-triamine (1:1) EC: 253-575-7 | 37640-57-6 | 1 - 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
Burns caused by molten material require hospital treatment.
In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. If irritation develops, seek medical attention.
Rinse mouth and then drink 200-300 ml of water. If difficulties occur: Seek medical attention.
Medical Treatment
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
ULTRAMID® A3WG6 LS BLACK 23189
---
ULTRAMID® B3EG3 UNCOLORED POLYAMIDE
---
ULTRAMID® 1021HS BLACK POLYAMIDE
---
Ultramid® B36 LN
CAS: 25038-54-4
ULTRAZOL® GA9052FM
UFI: N4VV-F2V6-F00U-PX0C
ULTRADUR® B4330G6 HR BLACK 15045 POLYBUTYLENE
---
RADIAMULS MG 2164K
CAS: 85251-77-0
ULTRADUR® B 4300 G6 BK Q16 15007 POLYBUTYLENE TEREPHTHALATE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable ventilation is provided to ensure limit values are not achieved.
Use additional heat protection gloves when handling hot molten masses (EN 407), e.g. of textile or leather.
Safety glasses with side-shields (frame goggles) (e.g. EN 166).
Breathing protection if breathable aerosols/dust are formed. Wear respiratory protection if ventilation is inadequate. Particle filter with high efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P3 or FFP3).
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ULTRAMID® C 52G4 MZ25 WHITE R9003?
The signal word is no signal word.
What is the physical form of ULTRAMID® C 52G4 MZ25 WHITE R9003?
ULTRAMID® C 52G4 MZ25 WHITE R9003 is a solid appearing as granules with various, depending on the colourant color. It has odourless odor.
What is the solubility of ULTRAMID® C 52G4 MZ25 WHITE R9003?
insoluble
What is ULTRAMID® C 52G4 MZ25 WHITE R9003 used for?
Polymer, for industrial processing only
What is the melting point of ULTRAMID® C 52G4 MZ25 WHITE R9003?
The melting point is approx. 220 ℃ .