Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LUXAN BIOPREN BMS
- Product Form
- Granule with IGR & bait in transparent plastic house.
- Chemical Name
- S-methoprene
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Insecticide
Manufacturers & Suppliers
Luxan (UK) Ltd
manufacturer
Crown Business Park, Old Dalby, Leicestershire, LE14 3NQ
0044 (0) 1664 820052
Emergency Contacts
Luxan UK Ltd
0044 (0) 1664 820052
Luxan BV
0031 4813 60811
National Poisons Information Service
0870 600 6266
Dublin
00353 1379 964
Dublin
00353 379966
Advice for veterinary surgeons
020 7635 9195
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| S-methoprene | 65733-16-6 | 0.5% | Yes |
| BHT | 128-37-0 | 0.002% | Yes |
| Sorbic acid EC: 203-768-7 | 110-44-1 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air.
Symptoms: No known adverse effects.
If irritation occurs, wash affected area with soap and water.
Symptoms: Not known to cause skin irritation.
Immediately flush the eyes with large amounts of water for at least 15 minutes. If irritation persists seek medical attention.
Symptoms: May cause eye irritation.
Seek medical attention.
Symptoms: No known adverse effects.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, carbon dioxide.
In case of fire handle as food.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent from reaching surface waters or other water supplies.
Sweep and transfer into waste containers for disposal. Clean the spill area with detergent and hot water.
Materials: detergent and hot water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store containers upright and closed. Store away from heat, ignition sources and strong oxidisers. Store away from odorous substances. Do not contaminate water, feed or food by storage, handling and disposal. Read and follow all precautions and instructions on the product label.
Store at room temperature in areas that are dry and well ventilated.
Store away from heat, ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Mechanical ventilation may be used when handling this product in enclosed spaces.
Not necessary.
Not necessary.
Avoid contact with clothes and skin.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under usual application conditions
None known.
Strong heating, sources of ignition, UV light.
Oxidants e.g., oxygen, alkali hypochlorides, odorants e.g. perfumes, organic chemicals.
Will not occur.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Wastes resulting from this product may be disposed of on site (household waste) or at an approved waste disposal facility.
Wastes resulting from this product may be disposed of on site (household waste) or at an approved waste disposal facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Symbol and Labelling: None. RISK PHRASES: R 52. SAFETY PHRASES: S 2-22-61.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LUXAN BIOPREN BMS?
The signal word is no signal word.
What is the physical form of LUXAN BIOPREN BMS?
LUXAN BIOPREN BMS is a sticky solid powder; powder and granules. . It has characteristic. odor.
What is the solubility of LUXAN BIOPREN BMS?
Partially (sol. of honey).
What is LUXAN BIOPREN BMS used for?
Insecticide
What is the melting point of LUXAN BIOPREN BMS?
The melting point is Over 180°C with decomposition (carbonisation). .