Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GETRIEBEL CLP 220 205L
- Product Code
- 4757
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Refer to description of material or preparation.
Manufacturers & Suppliers
LIQUI MOLY GmbH
manufacturer
Jerg-Wieland-Strae 4, D-89081 Ulm-Lehr
Emergency Contacts
LIQUI MOLY GmbH
(+49) 0731-1420-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person from danger area. Supply person with fresh air and consult doctor according to symptoms.
Wash thoroughly with soap and copious water - remove contaminated clothing immediately.
Symptoms: redness
Wash thoroughly for several minutes using copious water.
Do not induce vomiting. Consult doctor immediately.
Immediate Medical Attention
Consult doctor according to symptoms (inhalation), Seek medical help if necessary (eye contact), If skin irritation occurs (redness etc.), consult doctor (skin contact), Consult doctor immediately (ingestion).
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local suction or general air extraction.
Protective nitrile gloves (EN 374). Protective hand cream recommended. Additional information: No tests have been performed. Selection made for preparations according to the best available knowledge and information on the ingredients. Selection of materials derived from glove manufacturer's indications. Final selection of glove material must be made taking the breakthrough times, permeation rates and degradation into account. Selection of a suitable glove depends not only on the material but also on other quality characteristics and varies from manufacturer to manufacturer. In the case of preparations the resistance of glove materials cannot be calculated in advance so it has to be tested before use. The exact breakthrough time of the glove material can be requested from the protective glove manufacturer and must be observed.
Tight fitting protective goggles (EN 166) with side protection, with danger of projections.
If OES or MEL is exceeded, or if insufficient to maintain concentration under WEL or AG values, suitable breathing protection should be worn. Filter A - P2 (EN 141).
Protective working garments (e.g. safety shoes EN 344, long-sleeved protective working garments)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GETRIEBEL CLP 220 205L?
The signal word is no signal word.
What is the physical form of GETRIEBEL CLP 220 205L?
GETRIEBEL CLP 220 205L is a liquid with brown color. It has characteristic odor.
What is GETRIEBEL CLP 220 205L used for?
Refer to description of material or preparation.
What is the melting point of GETRIEBEL CLP 220 205L?
The melting point is -24 - -22 C and the boiling point is n.v..