Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
R-410A commonly used industrial and professional use for chemical analysis, calibration, (routine) quality control, laboratory use, under controlled conditions. perform risk assessment prior to use..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS04
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H280: Contains gas under pressure; may explode if heated.
Precautionary Statements
- P403: Store in a well-ventilated place.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Westfalen BV-SRL
national supplier
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+32 53 641070
BE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureGeneral Composition
Contains no other components or impurities which will influence the classification of the product.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Difluoromethane (R32) EC: 200-839-4 | 75-10-5 | 50% | ⚠️ Hazardous |
| Pentafluoroethane EC: 206-557-8 | 354-33-6 | 50% | ⚠️ Hazardous |
Additional Information
Full text of H- and EUH-statements: see section 16
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to uncontaminated area wearing self contained breathing apparatus. Keep victim warm and rested. Call a doctor. Perform cardiopulmonary resuscitation if breathing stopped.
Symptoms:
In high concentrations may cause asphyxiation. Symptoms may include loss of mobility/consciousness. Victim may not be aware of asphyxiation.
🖐️ Skin Contact
Adverse effects not expected from this product.
Symptoms:
Adverse effects not expected from this product.
👁️ Eye Contact
Adverse effects not expected from this product.
Symptoms:
Adverse effects not expected from this product.
🍽️ Ingestion/Swallowing
Ingestion is not considered a potential route of exposure.
Symptoms:
Ingestion is not considered a potential route of exposure.
🚨 Immediate Medical Attention Required
None.
Medical Treatment
None.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide adequate general and local exhaust ventilation. Oxygen detectors should be used when asphyxiating gases may be released. Systems under pressure should be regularily checked for leakages. Ensure exposure is below occupational exposure limits (where available). Consider the use of a work permit system e.g. for maintenance activities.
🧤 Hand Protection
Wear working gloves when handling gas containers. Standard EN 388 - Protective gloves against mechanical risk, performance level 1 or higher.
👁️ Eye Protection
Wear safety glasses with side shields. Standard EN 166 - Personal eye-protection - specifications.
😷 Respiratory Protection
Self contained breathing apparatus is recommended, where unknown exposure may be expected, e.g. during maintenance activities on installation systems. Standard EN 137 - Self-contained open-circuit compressed air breathing apparatus with full face mask. When indicated by a risk assessment, Respiratory Protective Equipment must be used. The selection of the Respiratory Protective Device (RPD) must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected RPD.
🦺 Skin/Body Protection
Wear safety shoes while handling containers. Standard EN ISO 20345 - Personal protective equipment - Safety footwear.
🌍 Environmental Exposure Controls
Refer to local regulations for restriction of emissions to the atmosphere. See section 13 for specific methods for waste gas treatment.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1078
📦 Proper Shipping Name
REFRIGERANT GAS, N.O.S. (Difluoromethane (R32), Pentafluoroethane)
⚠️ Transport Hazard Class
2.2
📋 Packing Group
Not applicable
🚛 ADR Transport Precautions
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: - Ensure there is adequate ventilation. - Ensure that containers are firmly secured. - Ensure valve is closed and not leaking. - Ensure valve outlet cap nut or plug (where provided) is correctly fitted. - Ensure valve protection device (where provided) is correctly fitted.
🚢 IMDG Maritime Transport Precautions
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: - Ensure there is adequate ventilation. - Ensure that containers are firmly secured. - Ensure valve is closed and not leaking. - Ensure valve outlet cap nut or plug (where provided) is correctly fitted. - Ensure valve protection device (where provided) is correctly fitted.
✈️ IATA Air Transport Precautions
Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency. Before transporting product containers: - Ensure there is adequate ventilation. - Ensure that containers are firmly secured. - Ensure valve is closed and not leaking. - Ensure valve outlet cap nut or plug (where provided) is correctly fitted. - Ensure valve protection device (where provided) is correctly fitted.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for R-410A?
The signal word for this substance is "warning".
What is the physical form of R-410A?
R-410A is a gas with mixture contains one or more component(s) which have the following colour(s): colourless. color. It has there may be no odour warning properties, odour is subjective and inadequate to warn of overexposure. mixture contains one or more component(s) which have the following odour: ethereal. odor.
What is R-410A used for?
Industrial and professional use for chemical analysis, calibration, (routine) quality control, laboratory use, under controlled conditions. Perform risk assessment prior to use.
What are the hazard statements for R-410A?
This substance has 1 hazard statements: H280: Contains gas under pressure; may explode if heated.
What is the melting point of R-410A?
The melting point is Not applicable for gases and gas mixtures. and the boiling point is Not applicable for gas mixtures..