Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
WHITE LITHIUM GREASE (AEROSOL) is a viscous off-white liquid (aerosol dispensed) substance commonly used grease lubricant lubricant - aerosol.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurized container: may burst if heated.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Pressurized container: Do not pierce or burn, even after use.
- P273: Avoid release to the environment.
- P391: Collect spillage.
- Protect from sunlight. Do not expose to temperatures exceeding 50C.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
CRC INDUSTRIES (AUST) PTY LIMITED
national supplier
9 Gladstone Road, Castle Hill, NSW, 2154, AUSTRALIA
AU
(02) 9849 6700
(02) 9680 4914
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
PIC
13 11 26
AU
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| NAPHTHA (PETROLEUM), HYDROTREATED LIGHT EC: 265-151-9 | 64742-49-0 | 30-60% | ✓ Non-hazardous |
| DISTILLATES (PETROLEUM), SOLVENT-DEWAXED HEAVY PARAFFINIC EC: 265-169-7 | 64742-65-0 | 10-30% | ✓ Non-hazardous |
| PETROLEUM GASES, LIQUEFIED EC: 270-704-2 | 68476-85-7 | 10-30% | ✓ Non-hazardous |
| ZINC OXIDE EC: 215-222-5 | 1314-13-2 | 5% | ✓ Non-hazardous |
| TRIBUTYL BORATE EC: 211-706-5 | 688-74-4 | 0.5-1.5% | ✓ Non-hazardous |
| PHOSPHORODITHIOIC ACID, O,O-DI-C1-14-ALKYL ESTERS, ZINC SALTS EC: 272-028-3 | 68649-42-3 | 1-5% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.
🖐️ Skin Contact
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a Poisons Information Centre or a doctor.
👁️ Eye Contact
If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.
🍽️ Ingestion/Swallowing
For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed, do not induce vomiting.
🚨 Immediate Medical Attention Required
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical explosion proof extraction ventilation is recommended. Flammable vapours may accumulate in poorly ventilated or confined areas. Vapours are heavier than air and may travel some distance to an ignition source and flash back.
🧤 Hand Protection
Wear nitrile or neoprene gloves.
👁️ Eye Protection
Wear splash-proof goggles.
😷 Respiratory Protection
Where an inhalation risk exists, wear a Type A-Class P1 (Organic gases/vapours and Particulate) respirator. Where the boiling point is < 65C, use an AX filter type.
🦺 Skin/Body Protection
When using large quantities or where heavy contamination is likely, wear coveralls.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1950
📦 Proper Shipping Name
AEROSOLS
⚠️ Transport Hazard Class
2.1
📋 Packing Group
None allocated.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for WHITE LITHIUM GREASE (AEROSOL)?
The signal word for this substance is "danger".
What is WHITE LITHIUM GREASE (AEROSOL) used for?
GREASE LUBRICANT LUBRICANT - AEROSOL
What are the hazard statements for WHITE LITHIUM GREASE (AEROSOL)?
This substance has 3 hazard statements: H222: Extremely flammable aerosol. H229: Pressurized container: may burst if heated. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of WHITE LITHIUM GREASE (AEROSOL)?
The melting point is NOT AVAILABLE and the boiling point is 59C (Initial).