Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Diphyl
- Product Code
- 000000000057697000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Synthetic organic heat transfer medium
Manufacturers & Suppliers
LANXESS Deutschland GmbH
manufacturer
51369 Leverkusen, Germany
+49 221 8885 2288
Emergency Contacts
CHEMTREC EMEA
+44 20 3885 0382
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Loosen tight clothing such as a collar, tie, belt or waistband. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. If unconscious, place in recovery position and get medical attention immediately. Maintain open airway.
Symptoms: May cause respiratory irritation.
If on skin, rinse well with water. If on clothes, remove clothes. If skin irritation persists, call a physician.
Symptoms: Causes skin irritation.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Keep eye wide open while rinsing. Remove contact lenses. Protect unharmed eye. Continue to rinse for at least 10 minutes. Call a physician if irritation develops or persists.
Symptoms: Causes serious eye irritation.
Do not induce vomiting without medical advice. Keep respiratory tract clear. Never give anything by mouth to an unconscious person. Rinse mouth with water. If a person feels unwell or symptoms of skin irritation appear, consult a physician.
Immediate Medical Attention
If unconscious, place in recovery position and get medical attention immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with adequate ventilation. If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Material: Fluorinated rubber - FKM; Break through time: >= 8 h; Glove thickness: >= 0,4 mm; Wearing time: < 60 min. Remarks: The suitability for a specific workplace should be discussed with the producers of the protective gloves. After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations.
Tightly fitting safety goggles. Wear face-shield and protective suit for abnormal processing problems.
In the case of vapour formation use a respirator with an approved filter. Wear breathing apparatus with separate air supply (compressed air respirator, tube apparatus) at higher concentrations. Filter type: Combined inorganic and acidic gas/vapour, ammonia/amines and organic vapour type (ABEK).
Protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (DIPHENYL ETHER, DIPHENYL)
- Transport Class
- 9
- Packing Group
- III
Environmentally hazardous substance. Irritating to skin and mucous membranes. Irritating to the eyes. Foul smelling. Keep separated from foodstuffs.
Environmentally hazardous substance. Irritating to skin and mucous membranes. Irritating to the eyes. Foul smelling. Keep separated from foodstuffs.
Environmentally hazardous substance. Irritating to skin and mucous membranes. Irritating to the eyes. Foul smelling. Keep separated from foodstuffs.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Diphyl?
The signal word is warning.
What is the physical form of Diphyl?
Diphyl is a liquid with colourless to light-yellow color. It has characteristic odor.
What is the solubility of Diphyl?
No data available
What is Diphyl used for?
Synthetic organic heat transfer medium
What are the hazard statements for Diphyl?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Diphyl?
The melting point is 12,2 C and the boiling point is 257 C (1.013 hPa).