Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha
- Product Code
- SA1007
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 649-265-00-X Check regulations →
- REACH No.
- 01-2119474679-18-XXXX
Identified Uses
For use as a blending component in gasoline and as a feedstock in the petrochemical industry. Other identified uses, for this product, can be found in section 15 of this eSDS.
Uses advised against
None known.
Manufacturers & Suppliers
Koch Supply & Trading Sárl
Route de Pre-bois Case Postale 1843 1215 Geneve 15 CH
+001 316-828-5601
Emergency Contacts
CHEMTREC
+001 703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Values shown are typical and may vary. This Safety Data Sheet (SDS) is intended to communicate potential hazards associated with the substance or mixture; it should not be used as a commercial specification sheet. For commercial specification information, contact your Koch representative.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (Petroleum), Straight Run EC: 265-042-6 | 64741-42-0 | 100% | Yes |
| n-Hexane EC: 203-777-6 | 110-54-3 | 15% | Yes |
| Butane, branched and linear EC: 271-009-7 | 68513-65-5 | 8% | Yes |
| Cyclohexane EC: 203-806-2 | 110-82-7 | 7% | Yes |
| Benzene EC: 200-753-7 | 71-43-2 | 5% | Yes |
| Toluene EC: 203-625-9 | 108-88-3 | 5% | Yes |
| Xylene EC: 215-535-7 | 1330-20-7 | 5% | Yes |
| 1,2,4-Trimethyl benzene EC: 202-436-9 | 95-63-6 | 2% | Yes |
| Ethylbenzene EC: 202-849-4 | 100-41-4 | 2% | Yes |
| Hydrogen sulphide EC: 231-977-3 | 7783-06-4 | 0.002% | Yes |
Values shown are typical and may vary. This Safety Data Sheet (SDS) is intended to communicate potential hazards associated with the substance or mixture; it should not be used as a commercial specification sheet. For commercial specification information, contact your Koch representative.
Notes
The full text for all R- and H-phrases is displayed in section 16. All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. Additional compounds which may be formed during processing are listed in Section 8.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen.
Symptoms: Inhalation of vapors may cause headache, nausea, vomiting and an altered state of consciousness.
Immediately remove contaminated clothing. Wash with soap and water. Continue to rinse for at least 15 minutes. In case of rashes, wounds or other skin disorders: Seek medical attention and bring along these instructions.
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids wide apart. Get medical attention if irritation develops or persists.
Immediately rinse mouth and drink plenty of water or milk. Keep person under observation. Do not induce vomiting. If vomiting occurs, keep head low. Transport immediately to hospital and take these instructions.
Immediate Medical Attention
Transport immediately to hospital and take these instructions. Seek medical attention if discomfort develops or persists, or in case of rashes, wounds or other skin disorders.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Naphtha (petroleum), full-range straight-run
CAS: 64741-42-0
Naphtha (petroleum), full-range straight-run
CAS: 64741-42-0
Naphtha (petroleum), full-range straight-run
CAS: 64741-42-0
Naphtha (petroleum), full-range alkylate
CAS: 64741-64-6
Full Range Naphtha
CAS: 64741-42-0
NAPHTHA (PETROLEUM), FULL-RANGE STRAIGHT-RUN (benzene < 1% - toluene < 3% - n-hexane < 10% - Flam. Liq. 2)
---
Naphtha, (petroleum), catalytic reformed
CAS: 68955-35-1
Naphtha (petroleum), isomerization
CAS: 64741-70-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours. Provide easy access to water supply and eye wash facilities. Use explosion-proof equipment.
Wear protective gloves. Suitability and durability of a glove is dependent upon usage (frequency and duration of contact), chemical resistance of glove material, and glove thickness. Nitrile gloves (minimum 0.38 mm thickness) are recommended, but be aware that the liquid may penetrate the gloves. Frequent change is advisable. Select Nitrile gloves tested to EN374 with breakthrough time of >240 minutes. For short-term, incidental contact, PVC gloves (minimum 1.3 mm thickness with breakthrough time of >60 minutes) may be suitable. Suitable gloves meeting these recommendations can be obtained from a glove supplier.
Wear goggles/face shield.
In case of inadequate ventilation or risk of inhalation of vapours, use suitable respiratory equipment with gas filter (type A2). Wear air-supplied mask in confined areas. Seek advice from local supervisor.
Protection suit must be worn. Anti-static and flame-retardant protective clothing is recommended.
Contain spills and prevent releases and observe national regulations on emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Heat, sparks, flames, elevated temperatures. Contact with incompatible materials.
Strong oxidising agents. Strong acids.
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1268
- Shipping Name
- Petroleum distillates, n.o.s. (Naphtha (petroleum), full-range straight-run)
- Transport Class
- 3
- Packing Group
- I
Read safety instructions, SDS and emergency procedures before handling.
Read safety instructions, SDS and emergency procedures before handling.
Read safety instructions, SDS and emergency procedures before handling.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha?
The signal word is danger.
What is the physical form of Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha?
Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha is a liquid. appearing as clear liquid. with colourless. color. It has solvent odor. odor.
What is Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha used for?
For use as a blending component in gasoline and as a feedstock in the petrochemical industry. Other identified uses, for this product, can be found in section 15 of this eSDS.
What are the hazard statements for Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha?
This substance has 8 hazard statements:
- H224: Extremely flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H350: May cause cancer.
- H411: Toxic to aquatic life with long lasting effects.
- May cause genetic defects.
- Suspected of damaging fertility or the unborn child.
What is the melting point of Naphtha (Petroleum), Full-Range Straight Run Straight Run Naphtha?
The melting point is -20 - 220 °C (-4 - 428 °F) and the boiling point is < 21 °C (< 69.8 °F).