Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dihydroxyacetone for synthesis
- Product Code
- 8.20482
- Chemical Name
- 1,3-dihydroxyacetone
Regulatory Identifiers
- CAS Number
- 96-26-4 Check regulations →
- EC Number
- 202-494-5 Check regulations →
Identified Uses
Chemical for synthesis
Manufacturers & Suppliers
Merck KGaA
global supplier
Frankfurter Str. 250 D-64271 DARMSTADT
+49 (0)6151 72-0
Emergency Contacts
CHEMTREC (GB)
+(44)-870-8200418
CHEMTREC Ireland
+(353)-19014670
CHEMTREC India
001-803-017-9114
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,3-dihydroxyacetone EC: 202-494-5 | 96-26-4 | --- | No |
Notes
No components need to be disclosed according to the applicable regulations.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Immediate Medical Attention
Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Diacetone alcohol ≥98 %, for synthesis
CAS: 123-42-2
Acetone ≥99,5 %, for synthesis
CAS: 67-64-1
Acetone ≥99,5 %, for synthesis
CAS: 67-64-1
2-Heptanone for synthesis
CAS: 110-43-0
Adipic acid for synthesis
CAS: 124-04-9
Adipic acid for synthesis
CAS: 124-04-9
Acrylic acid (stabilised with hydroquinone monomethyl ether) for synthesis
CAS: 79-10-7
Diacetone Alcohol
CAS: 123-42-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril L. Recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses.
Required when dusts are generated. Recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Dihydroxyacetone for synthesis?
The signal word is no signal word.
What is Dihydroxyacetone for synthesis used for?
Chemical for synthesis
What is the melting point of Dihydroxyacetone for synthesis?
The melting point is 96,5 C at 1.013 hPa - OECD Test Guideline 102 and the boiling point is 188 C at 1.013 hPa - OECD Test Guideline 103.