Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 21880 AZOCOL Z 155
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Photoemulsion for screen and textile printing
Manufacturers & Suppliers
Kissel + Wolf GmbH
national supplier
In den Ziegelwiesen 6 69168 Wiesloch Deutschland
+4962225780
Emergency Contacts
Emergency Contact
0049-6222-578-219
Only available during office hours. (08:00-16:00 CET)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of components, as listed below, with nonhazardous constituents
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4,4'-(1-Methylethylideen)bisfenol, polymeer met (chloormethyl)oxiraan, acrylaat EC: 500-130-2 | 55818-57-0 | 7 - 8% | Yes |
| 2-Propenoic acid, 2-hydroxyethyl ester, polymer with 1,3-diisocyanatomethylbenzene and .alpha.-hydro-.omega.hydroxypoly[oxy(methyl-1,2-ethanediyl)) EC: 630-381-4 | 37302-70-8 | 3 - 5% | Yes |
| glycerol, propoxylated, esters with acrylic acid EC: 500-114-5 | 52408-84-1 | 2.5 - 3% | Yes |
| ethoxylated (3) trimethylolpropane triacrylate EC: 500-066-5 | 28961-43-5 | 2 - 2.5% | Yes |
| 2-hydroxy-3-(prop-2-enoyloxy)propyl 2-methyl-2-propylhexanoate EC: 814-233-8 | 444649-70-1 | 1 - 2% | Yes |
| Ethyl 4-dimethylaminobenzoate EC: 233-634-3 | 10287-53-3 | 0.15 - 0.2% | Yes |
| 1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one EC: 220-120-9 | 2634-33-5 | 0.025% | Yes |
| METHYLISOTHIAZOLINONE EC: 220-239-6 | 2682-20-4 | 0.025% | Yes |
| 5-Chloro-2-methyl-4-isothiazolin-3-one / 2-Methyl-2H-isothiazol-3-one (3:1) | 55965-84-9 | 0.025% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Remove contaminated, saturated clothing immediately. After contact with skin, wash immediately with plenty of water and soap.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
Immediate Medical Attention
No special measures are necessary.
Medical Treatment
No special measures are necessary.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation.This can be achieved with local or room suction.
Suitable material: NBR (Nitrile rubber) Thickness of the glove material: >= 0,4 mm Breakthrough time:: >= 480 min For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles:EN ISO 374
Eye glasses with side protection
In case of inadequate ventilation wear respiratory protection.
Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 21880 AZOCOL Z 155?
The signal word is warning.
What is the physical form of 21880 AZOCOL Z 155?
21880 AZOCOL Z 155 is a liquid with blue color. It has arttypisch odor.
What is 21880 AZOCOL Z 155 used for?
Photoemulsion for screen and textile printing
What are the hazard statements for 21880 AZOCOL Z 155?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of 21880 AZOCOL Z 155?
The melting point is not determined and the boiling point is not determined.