Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Sigma Ink Series MP is a liquid substance commonly used ink sigma range mp for print with pads.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapor.
- H302 + H312 + H332 Harmful if swallowed, in contact with skin or if inhaled.
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H402: Harmful to aquatic life.
Precautionary Statements
- P233: Keep container tightly closed.
- P210: Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
- P240: Ground/bond container and receiving equipment.
- P241: Use explosion-proof electrical/ ventilating/ lighting equipment.
- P242: Use only non-sparking tools.
- P243: Take precautionary measures against static discharge.
- P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
- P264: Wash skin thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P271: Use only outdoors or in a well-ventilated area.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/ eye protection/ face protection.
- IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell. Rinse mouth.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor.
- P332+P313: If skin irritation occurs: Get medical advice/ attention.
- P362: Take off contaminated clothing and wash before reuse.
- P370+P378: In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
- P403+P235: Store in a well-ventilated place. Keep cool.
- P501: Dispose of contents/ container to an approved waste disposal plant.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Sigma Inks (USA)
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemtrec (And.Or.)
(800) 424-9300
US
Chemtrec Out
(703) 527-3887
US
collect calls
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl 3-ethoxypropionate | 763-69-9 | 21-32% | ✓ Non-hazardous |
| Cyclohexanone | 108-94-1 | 14-28% | ✓ Non-hazardous |
| Copolymer of Vinyl Cholride | 53710-52-4 | 7-18% | ✓ Non-hazardous |
| 2-methoxy-1-acetate of methyl ethyl | 108-65-6 | 5-10% | ✓ Non-hazardous |
| 2-Propanol, 1methoxy-, acetate | 108-65-6 | 5-10% | ✓ Non-hazardous |
| Pigment | N/A | 7-12% | ✓ Non-hazardous |
Composition Notes
Any concentration shown as a range is due to batch variation
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
🖐️ Skin Contact
Wash off with soap and plenty of water. Consult a physician.
👁️ Eye Contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
🍽️ Ingestion/Swallowing
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
🚨 Immediate Medical Attention Required
No data available
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
👁️ Eye Protection
Tightly fitting safety goggles. Face shield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
😷 Respiratory Protection
Where risk assessment shows air-purifying respirators are appropriate use a full face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
🦺 Skin/Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
🌍 Environmental Exposure Controls
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1210
📦 Proper Shipping Name
Printing Ink
⚠️ Transport Hazard Class
3
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Sigma Ink Series MP?
The signal word for this substance is "danger".
What is the physical form of Sigma Ink Series MP?
Sigma Ink Series MP is a liquid appearing as liquid with look product specification color. It has characteristic odor.
What is the solubility of Sigma Ink Series MP?
Not miscible. Hard to mix
What is Sigma Ink Series MP used for?
Ink Sigma range MP for print with pads
What are the hazard statements for Sigma Ink Series MP?
This substance has 5 hazard statements: H226: Flammable liquid and vapor. H302 + H312 + H332 Harmful if swallowed, in contact with skin or if inhaled. H315: Causes skin irritation. H318: Causes serious eye damage. H402: Harmful to aquatic life.
What is the melting point of Sigma Ink Series MP?
The melting point is Not determined and the boiling point is 295 F / 146 C.