NextSDS Logo
98

9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a

DANGER Liquefied Gas under pressure SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a
Product Form
liquefied hydrocarbons
Product Code
9881424 / 10612-R600a

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Refrigerant, technical and industrial uses.
Uses Advised Against
intentional abuse of very high concentration of vapours, even for short periods, can produce unconsciousness or might prove fatal.

Overview

9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a is a liquefied gas under pressure substance commonly used refrigerant, technical and industrial uses..

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger (for both))

Hazard Classifications

Flam. Gas Category 1 H220
Press. Gas H280

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS04 GHS Hazard Pictogram: Compressed gas hazard - Pressurized gases that may explode if heated

GHS04

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H220: Extremely Flammable Gas
  • H280: Contains gas under pressure; may explode if heated.

Precautionary Statements

  • P102: Keep out of reach of children.
  • P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking
  • P260: Do not breathe dust/fume/gas/mist/vapours/spray
  • P377: Leaking gas fire: do not extinguish, unless leak can be stopped safely
  • P381: Eliminate all ignition sources if safe to do so
  • IF IN EYES: Rinse cautiously with water with several minutes. Remove contact lenses. If present and easy to do. Continue rinsing.
  • If eye irritation persists: get medical advice/attention
  • Protect from sunlight. Do not expose to temperature exceeding 50C/122F.
  • P403: Store in well place
  • P501: Dispose of contents/containers in accordance with local regulation

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

REFCO Manufacturing Ltd.

undefined

๐Ÿ“

Industriestrasse 11 | 6285 Hitzkirch Switzerland

๐ŸŒ

CH

๐Ÿ“ž

+41 41 919 72 82

๐Ÿ“ 

+41 41 919 72 83

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Swiss toxicologically information centre Zurich

๐Ÿ“ž

145

๐ŸŒ

CH

๐Ÿ’ก

in urgent matters

Swiss toxicologically information centre Zurich

๐Ÿ“ž

+41 44 251 51 51

๐ŸŒ

CH

๐Ÿ’ก

in urgent matters

Swiss toxicologically information centre Zurich

๐Ÿ“ž

+41 44 251 66 66

๐ŸŒ

CH

๐Ÿ’ก

Not urgent matters

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Information on ingredients/Dangerous components according to Reg. CE 1272/2008 and Dir. 1999/45/CE

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Propane
EC: 200-827-9
74-98-6 5% โš ๏ธ Hazardous
Isobutane
EC: 200-857-2
75-28-5 95% โš ๏ธ Hazardous
n-butane
EC: 203-448-7
106-97-8 5% โš ๏ธ Hazardous

Composition Notes

It does not contain other products and/or impurity which may influence the product classification

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Take interested people in the open air. If the victim is not breathing, give artificial respiration. If breathing is difficult administer oxygen. In any case keep the injured(s) warm and seek immediate medical advice.

Symptoms:

High concentrations may cause asphyxiation. Symptoms may include loss of consciousness, without the person realizing it.

๐Ÿ–๏ธ Skin Contact

Remove, if possible, clothes while showering with warm water. Do not to rub frozen injured parts as skin damage may occur. As soon as possible, wet the area with warm water, and, if necessary, cover with sterile gauzes and wrap in a blanket. Seek immediate medical advice.

Symptoms:

The skin that has been in contact with the liquid become gray or white and can be covered of blisters. Accidental rapid evaporation of liquid may cause cold burns.

๐Ÿ‘๏ธ Eye Contact

Irrigate gently with many water with open eyelids (remove contact lenses, if the situation is possible) and seek, as soon as possible, medical attention preferably an ophthalmologist.

๐Ÿฝ๏ธ Ingestion/Swallowing

Consult a doctor as soon as possible.

๐Ÿšจ Immediate Medical Attention Required

In case of prolonged exposure to the substance it is essential medical assistance. Seek immediate medical advice. Seek, as soon as possible, medical attention preferably an ophthalmologist. Consult a doctor as soon as possible. Seek immediate medical attention of emergency specialist.

Medical Treatment

Providing medical treatments depending on the symptoms and keep the people involved under surveillance.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Liquefied Gas under pressure
Critical Property
๐Ÿ“Š Physical State Data
gas
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Liquefied Gas under pressure
๐ŸŽจ Colour
Clear
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
Characteristic
๐Ÿ“Š Odor Threshold
Not determined
๐Ÿงช Ph
Not applicable
๐ŸงŠ Melting Point
-159C
Critical Property
๐Ÿ’จ Boiling Point
-12C
Critical Property
๐Ÿ”ฅ Flash Point
-80C
Critical Property
๐Ÿ“Š Freezing Point
-159C
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not applicable. The substance is extremely volatile at room temperature
๐Ÿ’จ Vapor Pressure
2.1 bar g at 20C
๐Ÿ“Š Vapor Density
2.45 kg/m3(vapour)
๐Ÿ“Š Relative Density
More than 1
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not applicable. The substance is extremely volatile at room temperature
๐Ÿ“Š Upper Explosive Limit
8.4%
๐Ÿ“Š Lower Explosive Limit
1.8%
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
400C
๐Ÿ“Š Decomposition Temperature
Not applicable
๐Ÿ’ง Solubility
< 0,1 g/L a 20C
๐Ÿ“Š Partition Coefficient
2.86
๐Ÿ“Š Solubility In Water
Not available
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
100 %
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
15x10 -5 Pa x s at 15C (liquid phase)
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

It is suggested to work in conditions of natural or explosion-proof mechanical ventilation to make sure that the substance does not exceed 25% of the LEL (lower explosion limit in air 1.8%). All this involves a series of control operations (substitution, general ventilation, containment, work methods, changes in process or activity) that must be considered before the use of personal protective equipment.

๐Ÿงค Hand Protection

In case of possible contact with the skin, use gloves made of leather/crust (i.e. characterized by neoprene, PVA, nitrile), heat resistant/thermo insulating for any emergency. Gloves should be replaced at the first sign of wear. The choice of protective gloves depends on the conditions of use, and must take account of the manufacturer's instructions and knowledge on the part of the operator regarding its own allergies. Make reference to UNI EN 374.

๐Ÿ‘๏ธ Eye Protection

Use shielding glasses, visor or face shield to protect against liquid sprinklings. Make reference to UNI EN 166.

๐Ÿ˜ท Respiratory Protection

If the working instructions and others means to limit the exposure of workers are not appropriate- in order to respect the limit of exposure- others means of respiratory protection are necessary: gas mask with specific filter, organic vapours and dusts like UNI EN141, UNI EN143, UNI EN371. In confined areas it is suggested touse the respirators with AX filter (brown for vapours and organic gases); in case of high concentrations of gases an vapours use breathing apparatus (UNI EN 529).

๐Ÿฆบ Skin/Body Protection

Use suitable work clothing material, antistatic complete documents to cover also the upper and lower limbs. Change immediately in case of contamination, if conditions permit, and wash before reuse. Change work clothes at the first sign of wear. Make reference to UNI EN 465, EN 466, EN 467.

๐ŸŒ Environmental Exposure Controls

Theres no further information. Also refer to Section 6.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿ“ฆ Proper Shipping Name

Aerosols, flammable

๐Ÿš› ADR Transport Precautions

The packages must not be transported in the same place where is present the driver of vehicles. The cylinders must be kept upright and carried only in a safe position, preferably on a vehicle in a well-ventilated or open truck. Avoid transport on vehicles where the load space is not separated from the place where is present the driver. Make sure the driver is informed of the potential hazards of the load and he knows what to do in case of accident or emergency. Before to start a transport: - Be assured that containers are firmly secured. - Be assured that the cylinder valves are closed and that loss will not occur. - Be assured that the valve protection device, where provided, is properly mounted. - Be assured for an adequate ventilation. - Compliance with applicable regulations.

๐Ÿšข IMDG Maritime Transport Precautions

The packages must not be transported in the same place where is present the driver of vehicles. The cylinders must be kept upright and carried only in a safe position, preferably on a vehicle in a well-ventilated or open truck. Avoid transport on vehicles where the load space is not separated from the place where is present the driver. Make sure the driver is informed of the potential hazards of the load and he knows what to do in case of accident or emergency. Before to start a transport: - Be assured that containers are firmly secured. - Be assured that the cylinder valves are closed and that loss will not occur. - Be assured that the valve protection device, where provided, is properly mounted. - Be assured for an adequate ventilation. - Compliance with applicable regulations.

โœˆ๏ธ IATA Air Transport Precautions

The packages must not be transported in the same place where is present the driver of vehicles. The cylinders must be kept upright and carried only in a safe position, preferably on a vehicle in a well-ventilated or open truck. Avoid transport on vehicles where the load space is not separated from the place where is present the driver. Make sure the driver is informed of the potential hazards of the load and he knows what to do in case of accident or emergency. Before to start a transport: - Be assured that containers are firmly secured. - Be assured that the cylinder valves are closed and that loss will not occur. - Be assured that the valve protection device, where provided, is properly mounted. - Be assured for an adequate ventilation. - Compliance with applicable regulations.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for 9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a?

The signal word for this substance is "danger".

What is the physical form of 9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a?

9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a is a liquefied gas under pressure appearing as liquefied gas under pressure with clear color. It has characteristic odor.

What is the solubility of 9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a?

< 0,1 g/L a 20C

What is 9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a used for?

Refrigerant, technical and industrial uses.

What are the hazard statements for 9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a?

This substance has 2 hazard statements: H220: Extremely Flammable Gas H280: Contains gas under pressure; may explode if heated.

What is the melting point of 9881424 / Isobutane one-way bottle 420 gr. / 10612-R600a?

The melting point is -159C and the boiling point is -12C.