NextSDS Logo
Safety Data Sheet EN

Natriumhydroxide Ph.Eur./NF/BP/JP Pellets

CAS 1310-73-2
EC 215-185-5

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Natriumhydroxide Ph.Eur./NF/BP/JP Pellets
Product Form
Pellets
Product Code
28248
Chemical Name
NATRIUMHYDROXID
Synonyms
Caustic soda

Regulatory Identifiers

CAS Number
1310-73-2 Check regulations →
EC Number
215-185-5 Check regulations →
REACH No.
01-2119457892-27

Identified Uses

General chemical reagent

Manufacturers & Suppliers

V

VWR International Ltd.

undefined

Hunter Boulevard, Magna Park Lutterworth, LE17 4XN

0800 22 33 44

Emergency Contacts

CareChem24

+44 (0) 1270 502894

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1A H314
Eye Dam. Cat. 1 H318
Met. Corr. Cat. 1 H290

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H290 May be corrosive to metals.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide 1310-73-2 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Immediately call a POISON CENTRE/doctor. Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

Eye contact

In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Immediately call a POISON CENTRE/doctor. Do NOT induce vomiting. Rinse mouth thoroughly with water. Give nothing to eat or drink.

Immediate Medical Attention

Immediately call a POISON CENTRE/doctor. Immediate medical treatment required because corrosive injuries that are not treated are hard to cure.

Medical Treatment

no data available

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

no restriction

Specific hazards

In case of fire may be liberated: Pyrolysis products, toxic

Instructions

DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers. In case of fire: Evacuate area.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clear spills immediately. Clean contaminated articles and floor according to the environmental legislation. Collect in closed and suitable containers for disposal.

Related Substances

Similar chemicals with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid Inhalation. Avoid contact with eyes and skin.

Storage

Recommended storage temperature: 15-25°C. Keep container tightly closed and in a well-ventilated place. Protect from moisture.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Hands

When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374 In the case of wanting to use the gloves again, clean them before taking off and air them well. Short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): -, Recommended glove articles: VWR 112-1381. Long-term hand contact: Suitable material: Butyl caoutchouc (butyl rubber), Thickness of the glove material: 0,30 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3779.

Eyes

Eye glasses with side protection DIN-/EN-Norms: DIN EN 166 Recommendation: VWR 111-0432

Respiratory

Respiratory protection necessary at: aerosol or mist formation. Suitable respiratory protection apparatus: Filtering Half-face mask (DIN EN 149) Recommendation: VWR 111-0451. Suitable material: P3 Recommendation: VWR 111-0244.

Skin/Body

Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.

Environmental

no data available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
Soluble (g/L) in Ethanol: no data available
Cloud Point
---
Relative Density
2.13 g/cm³ (20 °C)
Vapor Density
no data available
Physical State
solid
Decomposition Temperature
no data available
Flammability
not applicable
Melting Point
323 °C
Ph
14 (50 g/l; H2O; 20 °C)
Explosive Limits
---
Softening Point
---
Physical State Data
solid
Metal Corrosion
---
Bulk Density
no data available
Kinematic Viscosity
no data available
Voc Content
---
Upper Explosive Limit
no data available
Properties Status
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Colour Intensity
---
Freezing Point
323 °C
Solubility In Fat
---
Vapor Pressure
1 mmHg (739 °C)
Solubility In Water
1,090 g/l (20 °C)
Flash Point
no data available
Dynamic Viscosity
no data available
Crystallisation Point
---
Appearance
Physical state: solid Colour: white
Lower Explosive Limit
no data available
Form
---
Auto Ignition Temperature
no data available
Evaporation Rate
no data available
Partition Coefficient
no data available
Molecular Weight
---
Odor
no data available
Odor Threshold
no data available
Colour
white
Boiling Point
1390 °C (1013 hPa)
Density
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is chemically stable under standard ambient conditions (room temperature).

Reactivity

no data available

Hazardous reactions

Formation of explosive mixtures with: Metal, base light metals Formation of: Hydrogen Violent reaction with: Acid Oxidising agent, strong

Avoid

no data available

Incompatible

Substance, organic Metal

Decomposition

no data available

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.

Disposal

Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.

Waste Codes

060204 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1823
Shipping Name
SODIUM HYDROXIDE, SOLID
Transport Class
8
Packing Group
II
IMDG

Segregation group: 18

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Natriumhydroxide Ph.Eur./NF/BP/JP Pellets known by?

Natriumhydroxide Ph.Eur./NF/BP/JP Pellets is also known as: Caustic soda

What is the hazard signal word for Natriumhydroxide Ph.Eur./NF/BP/JP Pellets?

The signal word is danger.

What is the physical form of Natriumhydroxide Ph.Eur./NF/BP/JP Pellets?

Natriumhydroxide Ph.Eur./NF/BP/JP Pellets is a solid appearing as physical state: solid colour: white with white color. It has no data available odor.

What is the solubility of Natriumhydroxide Ph.Eur./NF/BP/JP Pellets?

Soluble (g/L) in Ethanol: no data available

What is Natriumhydroxide Ph.Eur./NF/BP/JP Pellets used for?

General chemical reagent

What are the hazard statements for Natriumhydroxide Ph.Eur./NF/BP/JP Pellets?

This substance has 2 hazard statements:

  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Natriumhydroxide Ph.Eur./NF/BP/JP Pellets?

The melting point is 323 °C and the boiling point is 1390 °C (1013 hPa).

Compliance Scan

Free compliance check