Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Marble Filler 1000 Transparent L-Special waterclear commonly used knife filler/ surfacer.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H361: Suspected of damaging the unborn child.
- H372: Causes damage to the hearing organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P103: Read label before use.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P260: Do not breathe vapours.
- P273: Avoid release to the environment.
- P280: Wear protective gloves / eye protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312: Call a POISON CENTER/doctor if you feel unwell.
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/ regional/national/international regulations.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
AKEMI chemisch technische Spezialfabrik GmbH
manufacturer
Lechstrasse 28 D 90451 Nrnberg
DE
+49(0)911-642960
+49(0)911-644456
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
National Poison Inform. Centre Medical Toxicology Unit
+44 (171) 635 91 91
GB
AKEMI chemisch technische Spezialfabrik GmbH Product Safety Department
+49(0)911-64296-59
DE
Monday - Thursday from 07:30 a.m. to 16:30 p.m. Friday from 07:30 a.m. to 13:30 p.m.
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixturesGeneral Composition
Mixture of substances listed below with nonhazardous additions.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Styrene EC: 202-851-5 | 100-42-5 | 25-50% | Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Symptoms:
Headache, Breathing difficulty, Dizziness, Nausea, Coughing. Symptoms such as fatigue, nausea, imbalance and prolonged response times are observed. Danger of impaired breathing.
Skin Contact
If skin irritation continues, consult a doctor. Immediately wash with water and soap and rinse thoroughly.
Symptoms:
Skin irritations or allergic skin appearances.
Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Ingestion/Swallowing
If symptoms persist consult doctor. If swallowed, gastric irrigation with added, activated carbon. If swallowed or in case of vomiting, danger of entering the lungs.
Immediate Medical Attention Required
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. If swallowed, gastric irrigation with added, activated carbon.
Medical Treatment
If swallowed, gastric irrigation with added, activated carbon. With reference to section 2 the formulation contains styrene in the indicated mass concentration range. Styrene fumes will preferably be incorporated by inhalation via respiratory tract, skin resorption is currently considered as an inferior way of incorporation. In case of inhalation styrene is absorbed in a 60- 90% range. Distribution in organism occurs rapidly, the maximum blood concentration can be analyzed after one hour after incorporation.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Hand Protection
Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Skin protection agent recommendation for preventive skin shelter without use of protective gloves: ARRETIL (http://www.stoko.com) Skin protection agent recommendation for preventive skin shelter in application and combination of protective gloves: STOKO EMULSION (http://www.stoko.com) Skin protection recommendation for skin cleaning after product handling: Kresto Classic (http://debstoko.com) Skin protection agent recommendation for skin aftercare: STOKO VITAN (http://www.stoko.com) The protection gloves to be used have to comply with the specifications of the directive 89/686/EC and the directive derived decree EN374, respectively, e.g. the above listed protection glove type. The mentioned permeation times' data were generated and verified with material samples of the recommended protection glove type in the scope of laboratory anylyses of the company KCL GmbH in compliance with EN374. This recommendation refers exclusively to the material safety data sheet referenced product delivered by Akemi and the indicated field of application. In case of product dilution or in case of mixture with different substances or chemicals, and in condition of EN374 deviation the producer of CE-approved protection gloves must be contacted for detailed information (e.g., KCL GmbH, Germany, 36124 Eichenzell, internet: http://www.kcl.de). Material of gloves Fluorocarbon rubber (Viton) The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material . For the permanent contact gloves made of the following materials are suitable: Fluorocarbon rubber (Viton) Vitoject (KCL, Art_No. 890) . As protection from splashes gloves made of the following materials are suitable: Fluorocarbon rubber (Viton) Vitoject (KCL, Art_No. 890) . Not suitable are gloves made of the following materials: Nitrile rubber, NBR Camatril (KCL, 730, 731, 732, 733) Natural rubber, NR Chloroprene rubber, CR Leather gloves Strong material gloves
Eye Protection
Tightly sealed goggles
Respiratory Protection
Short term filter device: Filter A/P2 In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Skin/Body Protection
Protective work clothing
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
UN3269
Proper Shipping Name
POLYESTER RESIN KIT
Packing Group
III
IMDG Maritime Transport Precautions
Warning: Flammable liquids.
IATA Air Transport Precautions
Warning: Flammable liquids.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Marble Filler 1000 Transparent L-Special waterclear?
The signal word for this substance is "danger".
What is the solubility of Marble Filler 1000 Transparent L-Special waterclear?
Not miscible or difficult to mix.
What is Marble Filler 1000 Transparent L-Special waterclear used for?
Knife filler/ Surfacer
What are the hazard statements for Marble Filler 1000 Transparent L-Special waterclear?
This substance has 8 hazard statements: H226: Flammable liquid and vapour. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H335: May cause respiratory irritation. H361: Suspected of damaging the unborn child. H372: Causes damage to the hearing organs through prolonged or repeated exposure. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Marble Filler 1000 Transparent L-Special waterclear?
The melting point is Undetermined. and the boiling point is 145.