NextSDS Logo
Xp

Xpert vanA / GXVANA-10

WARNING solid, liquid SDS/MSDS
Chemical Identity

Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Xpert vanA / GXVANA-10
Product Code
Xpert vanA/vanB / GXVANA/B-CE-10

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
The following SDS is for the final finished product only as used in the laboratory.

Overview

Xpert vanA / GXVANA-10 is a beads are solid white components in cartridges; reagents are clear liquids which are primarily buffered in aqueous solutions. substance commonly used the following sds is for the final finished product only as used in the laboratory..

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

Safety Classification

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (Warning)

Hazard Classifications

Acute Tox.
Eye Irrit. Category 2A
Skin Irrit. Category 2

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

Precautionary Statements

  • P264: Wash hands thoroughly after handling.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/eye protection/face protection.
  • P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
  • P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P312: Call a POISON CENTER or physician if you feel unwell.
  • P501: Dispose of contents/container to location in accordance with local and regional/national/international regulations.
Supply Chain

Manufacturers & Suppliers

Authorized suppliers, manufacturers, and distribution network information

Cepheid

manufacturer

904 Caribbean Drive Sunnyvale, CA 94089

US

(888) 838-3222 option 2

Cepheid AB

manufacturer

Rntgenvgen 5 SE-171 54 Solna

SE

+33.563.82.53.19

Emergency

24/7 Emergency Response

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTREC

(800) 424-9300

US

CHEMTREC

1 (703) 741-5500

US

Outside of the US

Composition

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Reagent #2 contains the following hazardous ingredient: Sodium hydroxide 0.5-2.0%.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Natriumhydroxide Oplossing
EC: 215-185-5
1310-73-2 0.5-2% Hazardous

Composition Notes

Reagent #1 and Sample Reagent, and beads each are at concentrations less than 1% in the mixture or not considered hazardous under US hazard communication regulations (29 CFR 1910.1200), EU directives for classification and labeling of substances or mixtures or the Global Harmonization System for classification and labeling of substances or mixtures.

First Aid

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

Inhalation Exposure

remove person to fresh air and consult a physician.

Symptoms:

breathing difficulty

Skin Contact

Wash with plenty of soap and water. Consult a physician.

Symptoms:

Cause serious skin irritation.

Eye Contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult a physician.

Symptoms:

Causes serious eye irritation.

Ingestion/Swallowing

Rinse mouth with water. Never give anything by mouth to an unconscious person. Consult a physician.

Alternatives

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Section 9

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

Dynamic Viscosity
No information identified.
Vapor Pressure
Minimal.
Auto Ignition Temperature
No information identified.
Colour Intensity
Not available
Solubility
Reagents are already aqueous; beads are soluble in aqueous solutions.
Form
Not available
Evaporation Rate
Minimal.
Solubility In Fat
Not available
Flash Point
None.
Critical Property
State Under Standard Conditions
Not available
Bulk Density
Not available
Crystallisation Point
Not available
Solidification Point
Not available
Metal Corrosion
Not available
Colour
white, clear
Kinematic Viscosity
No information identified.
Density
Not available
Odor
Components are odorless.
Properties Status
Not available
Vapor Density
No information identified.
Physical State Data
Not available
Voc Content
Not available
Boiling Point
Liquid reagents near 100 C.
Critical Property
Relative Density
No information identified.
Freezing Point
Liquid reagents near 0 C.
Upper Explosive Limit
No information identified.
Appearance
Beads are solid white components in cartridges; reagents are clear liquids which are primarily buffered in aqueous solutions.
Partition Coefficient
N-octanol/water: No information identified.
Flammability
No information identified.
Solubility In Water
Reagents are already aqueous; beads are soluble in aqueous solutions.
Explosive Limits
Not available
Decomposition Temperature
No information identified.
Molecular Weight
Not available
Physical State
solid, liquid
Critical Property
Odor Threshold
No information identified.
Lower Explosive Limit
No information identified.
Cloud Point
Not available
Melting Point
Liquid reagents near 0 C.
Critical Property
Softening Point
Not available
Relative Evaporation Rate
Not available
Ph
Cartridge reagents: 8.1 - > 12.5.
Section 8

Exposure Controls & Personal Protective Equipment

Occupational exposure limits, engineering controls, and required safety equipment

Engineering Controls

None normally required.

Hand Protection

wear gloves

Eye Protection

Wear safety glasses with side shields or chemical splash goggles. Base the choice of protection on the job activity and potential for contact with eyes or face.

Respiratory Protection

None normally required.

Skin/Body Protection

In laboratory setting, wear lab coat at a minimum to minimize skin contact. Base the choice of protection on the job activity and potential for skin contact.

Section 14

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

UN Number

UN1824

Proper Shipping Name

Sodium hydroxide solution.

Transport Hazard Class

8

Packing Group

II

FAQ

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Xpert vanA / GXVANA-10?

The signal word for this substance is "warning".

What is the physical form of Xpert vanA / GXVANA-10?

Xpert vanA / GXVANA-10 is a solid, liquid appearing as beads are solid white components in cartridges; reagents are clear liquids which are primarily buffered in aqueous solutions. with white, clear color. It has components are odorless. odor.

What is the solubility of Xpert vanA / GXVANA-10?

Reagents are already aqueous; beads are soluble in aqueous solutions.

What is Xpert vanA / GXVANA-10 used for?

The following SDS is for the final finished product only as used in the laboratory.

What are the hazard statements for Xpert vanA / GXVANA-10?

This substance has 3 hazard statements: H302: Harmful if swallowed. H315: Causes skin irritation. H319: Causes serious eye irritation.

What is the melting point of Xpert vanA / GXVANA-10?

The melting point is Liquid reagents near 0 C. and the boiling point is Liquid reagents near 100 C..