Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
OK Flux 10.71 is a granules, non-volatile with varying color. substance commonly used arc welding.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H372: Causes damage to organs through prolonged or repeated exposure .?.
Precautionary Statements
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P264: Wash hands and face thoroughly after handling.
- P270: Do no eat, drink or smoke when using this product.
- P314: Get medical advice/attention if you feel unwell.
- P501: Dispose of contents/container to by lawful and appropriate disposal method.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
ESAB AB
+46 31 509000
SE
Available outside office hours No
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureGeneral Composition
This product is an agglomeration of calcined minerals.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MAGNESIUM OXIDE EC: 215-171-9 | 1309-48-4 | 20-30% | ✓ Non-hazardous |
| Oxyde d'aluminium EC: 215-691-6 | 1344-28-1 | 20-30% | ✓ Non-hazardous |
| QUARTZ* EC: 238-878-4 | 14808-60-7 | 10-20% | ⚠️ Hazardous |
| FLUORIDES EC: 232-188-7 | 7789-75-5 | 10-20% | ✓ Non-hazardous |
| SILICATE BINDER (SODIUM SILICATE) EC: 215-687-4 | 1344-09-8 | 5-10% | ✓ Non-hazardous |
| Silicium EC: 231-130-8 | 7440-21-3 | 1-5% | ✓ Non-hazardous |
| MANGANESE OXIDE EC: 215-695-8 | 1344-43-0 | 1-5% | ✓ Non-hazardous |
| Manganèse EC: 231-105-1 | 7439-96-5 | 0.1-1% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If breathing has stopped, perform artificial respiration and obtain medical assistance immediately! If breathing is difficult, provide fresh air and call physician.
🖐️ Skin Contact
For skin burns from arc radiation, promptly flush with cold water. Get medical attention for burns or irritations that persist. To remove dust or particles wash with mild soap and water
Symptoms:
skin burns from arc radiation, irritations
👁️ Eye Contact
For radiation burns due to arc flash, see physician. To remove dusts or fumes flush with water for at least fifteen minutes. If irritation persists, obtain medical assistance.
Symptoms:
radiation burns due to arc flash, irritation
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure sufficient ventilation, local exhaust, or both, to keep welding fumes and gases from breathing zone and general area.
🧤 Hand Protection
Abrasion (Cycles):(Type A-2 (500));(Type B-1 (100)); Cut (Factor):(Type A-1 (1.2));(Type B-1 (1.2)); Tear (Newton):(Type A-2 (25));(Type B-1 (10)); Puncture (Newton):(Type A-2 (60));(Type B-1 (20)); Burning Behaviour:(Type A-3);(Type B-2); Contact Heat:(Type A-1);(Type B-1); Convective Heat:(Type A- 2);(Type B--); Small Splashes:(Type A-3);(Type B-2); Dexterity:(Type A-1 (11));(Type B-4 (6.5)) Type B gloves are recommended when high dexterity is required as for TIG welding, while type A gloves are recommended for other welding processes. The contact temp (oC) is 100 and the threshold time (seconds) >15.
😷 Respiratory Protection
Use respirator or air supplied respirator when welding or brazing in a confined space, or where local exhaust or ventilation is not sufficient to keep exposure values within safe limits.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for OK Flux 10.71?
The signal word for this substance is "danger".
What is the physical form of OK Flux 10.71?
OK Flux 10.71 is a granules, non-volatile with varying color. appearing as granules, non-volatile with varying color. with not applicable color. It has not applicable odor.
What is the solubility of OK Flux 10.71?
Not applicable
What is OK Flux 10.71 used for?
Arc Welding
What are the hazard statements for OK Flux 10.71?
This substance has 1 hazard statements: H372: Causes damage to organs through prolonged or repeated exposure .?.
What is the melting point of OK Flux 10.71?
The melting point is >1000C and the boiling point is Not applicable.