Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HERKULA-UltraPrint Special all shades
- Product Code
- 884.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
colour / ink
Uses advised against
not applicable
Manufacturers & Suppliers
FARBWERKE HERKULA SA-AG
manufacturer
Industriezone I Friedensstrasse 21 4780 St.Vith BELGIUM
+ 32 (0) 80 22 87 63
www.herkula.com
Emergency Contacts
GBK Dangerous Goods Consulting LTD
+ 49 (0) 61 32 84 463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Radiation-hardening preparations
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (1-methyl-1,2-ethanediyl)bis[oxy(methyl-2,1-ethanediyl)] diacrylate EC: 256-032-2 | 42978-66-5 | 10 - 25% | Yes |
| Isobornylacrylate EC: 227-561-6 | 5888-33-5 | 10 - 25% | Yes |
| Dipentaerythritol Pentaacrylate EC: 800-838-4 | 1384855-91-7 | 10 - 25% | Yes |
| Bisphenol A Diglycidyl Diacrylate EC: 500-130-2 | 55818-57-0 | 1 - 10% | Yes |
| 2-Hydroxy-2-methylpropiophenone EC: 231-272-0 | 7473-98-5 | 1 - 10% | Yes |
| 2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one EC: 400-600-6 | 71868-10-5 | 1 - 10% | Yes |
| Tripropylenglycol, Esters with acrylic acid, reaction products with diethylamine EC: 601-101-8 | 111497-86-9 | 1 - 10% | Yes |
| benzophenone EC: 204-337-6 | 119-61-9 | 1 - 10% | Yes |
| Dipropyleneglycol Diacrylate EC: 260-754-3 | 54742-68-1 | 0.1 - 1% | Yes |
Full text of classification: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap.
Symptoms: Causes mild skin irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
Immediate Medical Attention
First Aid, decontamination, treatment of symptoms.
Medical Treatment
treatment of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
HERKULA-UltraPrint Special all shades
---
HERKULA-UltraPrint Spezial
---
HERKULA-UltraCoat Spezial farblos matt
---
Hercobond™ 6950 Paper Performance Additive
---
UV6000 - UV Satin Overprint Varnish
---
UV6024 - UV Gravure Matt Scratchresistant
---
IC-2CL158 PRINTING INK
---
UV6107 - UV Gravure Matt Varnish
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation. This can be achieved with local or room suction. If this should not be sufficient to keep aerosol and solvent vapour concentration below the exposure limit values, a suitable respiratory protection must be used.
For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm ; Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374 Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
Wear closely fitting protective glasses in case of splashes.
If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.
Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HERKULA-UltraPrint Special all shades?
The signal word is danger.
What is the physical form of HERKULA-UltraPrint Special all shades?
HERKULA-UltraPrint Special all shades is a liquid with refer to label color. It has characteristic odor.
What is HERKULA-UltraPrint Special all shades used for?
colour / ink
What are the hazard statements for HERKULA-UltraPrint Special all shades?
This substance has 6 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H360: May damage fertility. May damage the unborn child.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of HERKULA-UltraPrint Special all shades?
The melting point is not applicable and the boiling point is not applicable.