Duroct Calcium 10%

remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.

Remove contaminated clothing and footwear, rinse skin or shower the person affected if appropriate with plenty of cold water and neutral soap. In serious cases see a doctor. If the product causes burns or freezing, clothing should not be removed as this could worsen the injury caused if it is stuck to the skin. If blisters form on the skin, these should never be burst as this will increase the risk of infection.

Symptoms: burns or freezing, blisters

Rinse eyes thoroughly with lukewarm water for at least 15 minutes. Do not allow the person affected to rub or close their eyes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.

Request medical assistance immediately, showing the SDS of this product. Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. In the case of loss of consciousness do not administer anything orally unless supervised by a doctor. Rinse out the mouth and throat, as they may have been affected during ingestion. Keep the person affected at rest.

Product is non-flammable under normal conditions of storage, handling and use. In the case of combustion as a result of improper handling, storage or use preferably use polyvalent powder extinguishers (ABC powder), in accordance with the Regulation on fire protection systems.

Non-applicable

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures.

For non-emergency personnel: Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those who do not have protection. For emergency responders: Wear protective equipment. Keep unprotected persons away.

This product is not classified as hazardous to the environment. Keep product away from drains, surface and ground water.

Absorb the spillage using sand or inert absorbent and move it to a safe place.

Materials: sand or inert absorbent. Do not absorb in sawdust or other combustible absorbents.

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Product is non-flammable under normal conditions of storage, handling and use. It is recommended to transfer at slow speeds to avoid the generation of electrostatic charges that can affect flammable products.

NON-disposable chemical protective gloves. Standards: EN ISO 374-1:2016+A1:2018, EN 16523-1:2015+A1:2018, EN ISO 21420:2020. Remarks: The Breakthrough Time indicated by the manufacturer must exceed the period during which the product is being used. Do not use protective creams after the product has come into contact with skin. As the product is a mixture of several substances, the resistance of the glove material can not be calculated in advance with total reliability and has therefore to be checked prior to the application.

Face shield. Standards: EN 166:2002, EN 167:2002, EN 168:2002, EN ISO 4007:2018. Remarks: Clean daily and disinfect periodically according to the manufacturer’s instructions. Use if there is a risk of splashing.

The use of protection equipment will be necessary if a mist forms or if the occupational exposure limits are exceeded.

Disposable clothing for protection against chemical risks. Standards: EN 13034:2005+A1:2009, EN 168:2002, EN ISO 13982-1:2004/A1:2010, EN ISO 6529:2013, EN ISO 6530:2005, EN 464:1994. Remarks: For professional use only. Clean periodically according to the manufacturer’s instructions. Safety footwear for protection against chemical risk. Standards: EN ISO 20345:2011, EN 13832-1:2019. Remarks: Replace boots at any sign of deterioration.

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see sub section 7.1.D

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions. See section 7 from Safety Data Sheet.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Applicable for handling and storage at room temperature: Shock and friction: Not applicable, Contact with air: Not applicable, Increase in temperature: Not applicable, Sunlight: Not applicable, Humidity: Not applicable.

Avoid strong acids, Avoid alkalis or strong bases. Water: Not applicable, Oxidising materials: Not applicable, Combustible materials: Not applicable.

Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO₂), carbon monoxide and other organic compounds.