NextSDS Logo
Safety Data Sheet NL

SIGMACOVER 456 BASE (LEAD FREE COLOURS)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SIGMACOVER 456 BASE (LEAD FREE COLOURS)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

verf

Manufacturers & Suppliers

P

PPG Coatings SPRL/BVBA

manufacturer

Noordersingel 23, B-2040 Borgerhout

+32 3 3606311

Emergency Contacts

Emergency Contact

+31 20 4075210

NATIONAL POISONS INFORMATION CENTRE

+31 30 2748888

CENTRE ANTI-POISONS/ANTIGIFCENTRUM

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
xyleen EC: 215-535-7 1330-20-7 12.5 - 20% Yes
2-methylpropaan-1-ol EC: 201-148-0 78-83-1 1 - 2.5% Yes
ethylbenzeen EC: 202-849-4 100-41-4 2.5 - 10% Yes
reactieprodukt: bisfenolA-epichloorhydrine epoxyhars (gemiddeld molecuulgewicht 700) 25068-38-6 5 - 10% Yes

Notes

De producent verklaart dat voor de in hoofdstuk 3 niet vermelde R-zinnen, de totale hoeveelheid gevaarlijke componenten beneden de grens liggen. Indien meerdere ingredienten met gelijke namen of nummers verschijnen hebben deze verschillende gevaren eigenschappen, bijvoorbeeld vlampunt. Kandidaat-lijst van zeer zorgwekkende stoffen voor autorisatie.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. Bring the person concerned to rest and keep warm. In case of irregular breathing or respiratory arrest, apply artificial respiration. In case of unconsciousness, apply the recovery position and seek medical advice.

Skin contact

Remove contaminated clothing immediately. Wash the skin thoroughly with soap and water or an approved skin cleanser.

Eye contact

Keep eyelids open and rinse abundantly with pure, flowing water for at least 10 minutes. Remove contact lenses. Seek medical advice.

Ingestion

In case of ingestion, consult a doctor immediately. Let the victim rest.

Immediate Medical Attention

If symptoms are not transient and in case of doubt, medical help should be sought. Seek medical advice for eye contact. In case of unconsciousness due to inhalation, apply the recovery position and seek medical advice. In case of ingestion, consult a doctor immediately. Seek medical help for burns. In case of an accident or if feeling unwell, immediately consult a doctor (show the label if possible). Show this safety data sheet to the attending physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Indien werknemers - ook als ze niet zelf bezig zijn met de verwerking van het product - zich in een spuitcabine bevinden, dient ventilatie aanwezig te zijn voor eventuele spuitdeeltjes en oplosmiddeldampen.

Hands

Bij langer of herhaaldelijk kontakt handschoenen gebruiken. Gerbuik chemicalienbestendige handschoenen, zoals aangegeven in standaard EN 374: Beschermende handschoenen tegen chemicalien en microorganismen. Aanbevolen handschoenen: Viton (R). Minimale doorbreektijd: 480 min. Indien langdurig en regelmatig contact voorkomt, een handschoen met een beschermingsklasse 6 (doorbreektijd meer dan 480 minuten volgens EN 374) is aanbevolen. Als slecht een kort contact verwacht wordt, een handschoen met een beschermingsklasse 2 of hoger (doorbreektijd groter dan 30 minuten volgens EN 374) is aanbevolen. ATTENTIE: De keuze van een specifieke handschoen voor bepaalde applicaties en de duur van gebruik zou mede gebaseerd moeten zijn op alle relevante factoren op de werkplaats zoals, maar niet gelimiteerd tot: andere chemicalien die gebruikt worden, fysieke vereisten (snij/doorboor bescherming, gebruiksgemak, thermische bescherming), mogelijke lichaamsreacties op het materiaal van de handschoenen, maar ook de instructies/specificaties geleverd door de handschoenleverancier.

Eyes

Het dragen van een chemicalienbestendige beschermingsbril is verplicht. Afsluitende bril.

Respiratory

In spuitcabines dienen werknemers een verse-lucht kap te dragen tijdens het spuitproces tot het moment dat de concentratie is gedaald tot beneden de MAC-waarde. P2A2-halfgelaatscombimasker.

Skin/Body

Het personeel dient beschermende kleding te dragen. Na kontakt met de huid grondig wassen. Het dragen van antistatische schoenen is verplicht.

Environmental

Zie de nationale wetgeving in hoofdstuk 15 voor wetgeving met betrekking op mileubescherming.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Odor Threshold
---
Partition Coefficient
---
Solidification Point
---
Freezing Point
---
Appearance
---
Properties Status
---
Flammability
---
Colour
verscheidene
Melting Point
---
Physical State Data
liquid
Vapor Pressure
---
Evaporation Rate
---
Metal Corrosion
---
Relative Evaporation Rate
---
Ph
---
Molecular Weight
---
Solubility In Fat
---
Kinematic Viscosity
---
Solubility In Water
niet mengbaar
Voc Content
---
Cloud Point
---
Vapor Density
---
Relative Density
---
Explosive Limits
---
Physical State
liquid
State Under Standard Conditions
---
Decomposition Temperature
---
Softening Point
---
Dynamic Viscosity
2,000 mPa.s bij 23 C
Colour Intensity
---
Density
1.43 g/cm3 bij 20 C
Flash Point
27.5 C
Upper Explosive Limit
7.31 %(V) 319.91 g/m3
Form
viskeus
Solubility
---
Boiling Point
---
Lower Explosive Limit
1.02 %(V) 44.5 g/m3
Bulk Density
---
Auto Ignition Temperature
- 430 C
Odor
licht aromatisch
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
PAINT
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SIGMACOVER 456 BASE (LEAD FREE COLOURS)?

The signal word is na: r-phrases.

What is the physical form of SIGMACOVER 456 BASE (LEAD FREE COLOURS)?

SIGMACOVER 456 BASE (LEAD FREE COLOURS) is a liquid with verscheidene color. It has licht aromatisch odor.

What is SIGMACOVER 456 BASE (LEAD FREE COLOURS) used for?

verf