NextSDS Logo
Kn

Knetbeton-Meistermischung

DANGER Powder SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Knetbeton-Meistermischung
Product Code
34212000

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Hobby and craft supplies

Overview

Knetbeton-Meistermischung commonly used hobby and craft supplies.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Skin Irrit. Category 2
Eye Dam. Category 1
STOT SE Category 3

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.

Precautionary Statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P261: Avoid breathing dust.
  • P280: Wear protective gloves/eye protection.
  • P302+P352: IF ON SKIN: Wash with plenty of water.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P501: Dispose of contents/container to in accordance with local and national regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

RAYHER HOBBY GmbH

distributor

πŸ“

Fockestrae 15 D-88471 Laupheim

🌍

DE

πŸ“ž

+49 (0) 7392/7 00 5-0

πŸ“ 

+49 (0) 7392/7 00 5-48

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

GBK GmbH

πŸ“ž

+49 - (0) 6132 - 84463

🌍

DE

πŸ•’

24h - 7d/w - 365d/a

πŸ’‘

INTERNATIONAL

NHS

πŸ“ž

111

🌍

GB

πŸ’‘

In England and Wales

NHS 24

πŸ“ž

111

🌍

GB

πŸ’‘

In Scotland

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Mixture

General Composition

Mixture containing following substances with additives

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
cement, portland, < 2ppm Cr VI
EC: 266-043-4
65997-15-1 30-99% ⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Move to fresh air in case of accidental inhalation of dust or fumes from overheating or combustion. In the event of symptoms refer for medical treatment.

Symptoms:

May cause respiratory irritation.

πŸ–οΈ Skin Contact

Wash off immediately with soap and plenty of water. Consult a doctor if skin irritation persists.

Symptoms:

Causes skin irritation.

πŸ‘οΈ Eye Contact

Remove contact lens. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical treatment by eye specialist.

Symptoms:

Causes serious eye irritation.

🍽️ Ingestion/Swallowing

Rinse out mouth and give plenty of water to drink. Never give anything by mouth to an unconscious person. Consult a physician. Induce vomiting only upon the advice of a physician.

🚨 Immediate Medical Attention Required

Treat symptoms.

Medical Treatment

Treat symptoms.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

πŸ§ͺ Physical State
Powder
Critical Property
πŸ“Š Physical State Data
solid
πŸ“Š State Under Standard Conditions
Not available
πŸ‘οΈ Appearance
Not available
🎨 Colour
Grey / White
πŸ“Š Colour Intensity
Not available
πŸ“Š Form
Not available
πŸ‘ƒ Odor
Odourless
πŸ“Š Odor Threshold
Not available
πŸ§ͺ Ph
11,0 - 13,5
🧊 Melting Point
> 1250
Critical Property
πŸ’¨ Boiling Point
n.a.
Critical Property
πŸ”₯ Flash Point
n.a.
Critical Property
πŸ“Š Freezing Point
Not available
πŸ“Š Softening Point
n.a.
πŸ“Š Solidification Point
Not available
πŸ“Š Cloud Point
Not available
πŸ“Š Crystallisation Point
Not available
πŸ“Š Relative Evaporation Rate
Not available
πŸ’¨ Evaporation Rate
n.a.
πŸ’¨ Vapor Pressure
n.a.
πŸ“Š Vapor Density
n.a.
πŸ“Š Relative Density
Not available
πŸ“Š Bulk Density
n.d.
βš–οΈ Density
2,75 - 3,2 g/cm3
Critical Property
πŸ”₯ Flammability
n.a.
πŸ“Š Upper Explosive Limit
n.a.
πŸ“Š Lower Explosive Limit
n.a.
πŸ“Š Explosive Limits
Not available
πŸ“Š Auto Ignition Temperature
n.a.
πŸ“Š Decomposition Temperature
n.d.
πŸ’§ Solubility
n.d.
πŸ“Š Partition Coefficient
n.a.
πŸ“Š Solubility In Water
0,1 - 1,5 g/L
πŸ“Š Solubility In Fat
Not available
πŸ“Š Molecular Weight
Not available
πŸ“Š Voc Content
Not available
πŸ“Š Metal Corrosion
Not available
πŸ“Š Dynamic Viscosity
n.a.
πŸ“Š Kinematic Viscosity
n.a.
πŸ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.

🧀 Hand Protection

Protective gloves resistant to chemicals made off natural-rubber latex, minimum coat thickness 0.6 mm, permeation resistance (wear duration) approx. 480 minutes, i.e. protective glove <Lapren 706> made by www.kcl.de. This recommendation refers exclusively to the chemical compatibility and the lab test conforming to EN 374 carried out under lab conditions. Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves.

πŸ‘οΈ Eye Protection

Safety goggles with side protection (EN 166).

😷 Respiratory Protection

Respirator must be worn if exposed to dust. [Particle filter P1]

🦺 Skin/Body Protection

Long sleeved clothing (DIN EN ISO 6530)

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Knetbeton-Meistermischung?

The signal word for this substance is "danger".

What is the physical form of Knetbeton-Meistermischung?

Knetbeton-Meistermischung is a powder with grey / white color. It has odourless odor.

What is the solubility of Knetbeton-Meistermischung?

n.d.

What is Knetbeton-Meistermischung used for?

Hobby and craft supplies

What are the hazard statements for Knetbeton-Meistermischung?

This substance has 3 hazard statements: H315: Causes skin irritation. H318: Causes serious eye damage. H335: May cause respiratory irritation.

What is the melting point of Knetbeton-Meistermischung?

The melting point is > 1250 and the boiling point is n.a..