NextSDS Logo
Safety Data Sheet DE

Klberlectric KR 44-22

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Klberlectric KR 44-22
Product Form
Grease
Product Code
091033

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Grease

Uses advised against

Restricted to professional users.

Manufacturers & Suppliers

K

Klber Lubrication Mnchen

manufacturer

Geisenhausenerstr. 7 81379 Mnchen Deutschland

+49 (0) 89 7876 0

Klber Lubrication Deutschland logo

Klber Lubrication Deutschland

national supplier

Geisenhausenerstrae 7 81379 Mnchen Deutschland

+49 89 7876 0

www.klueber.com

Emergency Contacts

Emergency Contact

+49 89 7876 700

24 hrs

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Chemical nature Components : lithium soap UV indicator Synthetic hydrocarbon oil

Chemical Name CAS Number Concentration Hazardous
Dec-1-ene, homopolymer, hydrogenated EC: 500-183-1 68037-01-4 70 - 90% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

Remove contaminated clothing. If irritation develops, get medical attention. Wash off with soap and water.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

Ingestion

Move the victim to fresh air. Do not induce vomiting without medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Material : Nitrile rubber Break through time : - 10 min Protective index : Class 1 Remarks : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Eyes

Tightly fitting safety goggles

Respiratory

Not required; except in case of aerosol formation. Filter type : Filter type P

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
paste
Physical State Data
solid
State Under Standard Conditions
---
Appearance
paste
Colour
beige
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
No data available
Flash Point
Not applicable
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
< 0,001 hPa (20 C)
Vapor Density
---
Relative Density
---
Bulk Density
No data available
Density
0,84 g/cm3 (20 C)
Flammability
Combustible Solids
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Klberlectric KR 44-22?

The signal word is no signal word.

What is the physical form of Klberlectric KR 44-22?

Klberlectric KR 44-22 is a paste appearing as paste with beige color. It has characteristic odor.

What is the solubility of Klberlectric KR 44-22?

No data available

What is Klberlectric KR 44-22 used for?

Grease

What is the melting point of Klberlectric KR 44-22?

The melting point is No data available and the boiling point is No data available.

Compliance Scanner

Scan your compliance