Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Hydropalat® WE 3966 NM
- Chemical Name
- Oxirane, methyl-, polymer with oxirane
Regulatory Identifiers
- CAS Number
- 9003-11-6 Check regulations →
- EC Number
- 618-355-0 Check regulations →
Identified Uses
wetting agent
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
+49 621 60-0
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Oxirane, methyl-, polymer with oxirane
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oxirane, methyl-, polymer with oxirane EC: 618-355-0 | 9003-11-6 | --- | No |
Notes
No particular hazards known.
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink 200-300 ml of water.
Immediate Medical Attention
Symptomatic treatment (decontamination, vital functions).
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN ISO 374-1). Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other. Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Breathing protection if dusts are formed. Particle filter with low efficiency for solid particles (e.g. EN 143 or 149, Type P1 or FFP1)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Hydropalat® WE 3966 NM?
The signal word is no signal word.
What is the physical form of Hydropalat® WE 3966 NM?
Hydropalat® WE 3966 NM is a solid with white to cream color. It has mild, of polyol odor.
What is the solubility of Hydropalat® WE 3966 NM?
soluble
What is Hydropalat® WE 3966 NM used for?
wetting agent
What is the melting point of Hydropalat® WE 3966 NM?
The melting point is 50 ℃ and the boiling point is not determined.