NextSDS Logo
Safety Data Sheet EN

Tacoma Screw Products Red High Strength Threadlocker

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Tacoma Screw Products Red High Strength Threadlocker
Product Code
617-507
Synonyms
617-507

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Refer to Technical Data

Uses advised against

Refer to Technical Data

Manufacturers & Suppliers

D

Dynatex a division of Soudal Accumetric

manufacturer

350 Ring Road, Elizabethtown, KY, 42701, USA

(270) 769-3385

Emergency Contacts

CHEMTREC

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4
Acute Tox. Cat. 4
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Skin Irrit. Cat. 2
STOT SE Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H332 Harmful if inhaled
H335 May cause respiratory irritation.

Precautionary Statements

P103 Read label before use.
P261 Avoid breathing dust/fume/gas/mist/ vapors/spray.
P264 Wash hands thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing must not be allowed out of the workplace.
P280 Wear eye protection/face protection.
P280 Wear protective gloves.
P302 + P352 If on skin: Wash with plenty of soap and water.
P304 + P312 If swallowed: Call a poison center/docto if you feel unwell.
P304 + P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a poison center/doctor if you feel unwell.
P330 Rinse mouth.
P332 + P313 If skin irritation occurs: Get medical advice/attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P363 Wash contaminated clothing before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national /international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
α,α-dimethylbenzyl hydroperoxide 80-15-9 0.1 - 1% No
2-Hydroxypropyl methacrylate 27813-02-1 2.5 - 10% No
Polyethylene glycol 200 monooleate 9004-96-0 25 - 50% No
Polyethylene Glycol 200 Dimethacrylate 25852-47-5 50 - 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If symptoms persist, obtain appropriate medical attention.

Skin contact

Wash affected area thoroughly with soap and water. Remove contaminated clothing and launder before re-use. Get medical attention if irritation develops.

Eye contact

Rinse with water for 15 minutes. Obtain medical attention.

Ingestion

Do not induce vomiting. Keep individual calm. Obtain medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon Dioxide, Dry Chemical, Foam

Specific hazards

None known

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Observe all personal protection equipment recommendations. Soak up with inert absorbent. Store in a partly filled, closed container until disposal. Prevent product from entering drains.

Environmental

Prevent product from entering drains.

Cleanup methods

Soak up with inert absorbent.

Materials: inert absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin, eyes, and clothing. Avoid breathing vapor or mist.

Storage

Store at or below 100F. Keep away from heat, sparks and open flames.

Fire prevention

Keep away from heat, sparks and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Local exhaust ventilation is recommended to maintain vapor level below TLV.

Hands

Rubber, polyethylene, or neoprene gloves.

Eyes

Safety goggles or glasses with side shields are recommended.

Respiratory

Use NIOSH approved respirator for individuals who are sensitive.

Skin/Body

Rubber, polyethylene, or neoprene gloves.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Red
Colour Intensity
---
Form
---
Odor
Mild
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
>300°F
Flash Point
>200°F
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not Applicable
Vapor Pressure
< 5mm Hg @ 80°F
Vapor Density
Approx. 3 (Air=1)
Relative Density
1.1
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Slight in Water
Partition Coefficient
---
Solubility In Water
Slight
Solubility In Fat
---
Molecular Weight
---
Voc Content
13.5% 142 g/L
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Hazardous reactions

Will not occur

Avoid

None known

Decomposition

Oxides of carbon, sulfur, and nitrogen

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Disposal of unused portions of this product and process waste containing this product should be done only after a careful evaluation and in compliance with all federal, local and state laws.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Tacoma Screw Products Red High Strength Threadlocker known by?

Tacoma Screw Products Red High Strength Threadlocker is also known as: 617-507

What is the hazard signal word for Tacoma Screw Products Red High Strength Threadlocker?

The signal word is warning.

What is the physical form of Tacoma Screw Products Red High Strength Threadlocker?

Tacoma Screw Products Red High Strength Threadlocker is a liquid with red color. It has mild odor.

What is the solubility of Tacoma Screw Products Red High Strength Threadlocker?

Slight in Water

What is Tacoma Screw Products Red High Strength Threadlocker used for?

Refer to Technical Data

What are the hazard statements for Tacoma Screw Products Red High Strength Threadlocker?

This substance has 6 hazard statements:

  • H302: Harmful if swallowed
  • H315: Causes skin irritation
  • H317: May cause an allergic skin reaction
  • H319: Causes serious eye irritation
  • H332: Harmful if inhaled
  • H335: May cause respiratory irritation.