Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sikaflex11 FC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For further information, refer to product data sheet.
Manufacturers & Suppliers
Sika Corporation
national supplier
201 Polito Avenue Lyndhurst, NJ 07071 USA
(201) 933-8800
www.sikausa.com
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylenes (o-, m-, p- Isomers) EC: 215-535-7 | 1330-20-7 | 1 - 2% | Yes |
| 4,4'-methylenediphenyl diisocyanate EC: 202-966-0 | 101-68-8 | 0.1 - 1% | Yes |
| ETHYLBENZENE EC: 202-849-4 | 100-41-4 | 0.1 - 1% | Yes |
| Quartz (SiO2) <5m EC: 238-878-4 | 14808-60-7 | 0.1 - 1% | Yes |
Notes
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water.
Remove contact lenses. Keep eye wide open while rinsing.
Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.
Immediate Medical Attention
Consult a physician after significant exposure. If symptoms persist, call a physician. If eye irritation persists, consult a specialist. Obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use of adequate ventilation should be sufficient to control worker exposure to airborne contaminants. If the use of this product generates dust, fumes, gas, vapor or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure below any recommended or statutory limits.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary.
Use a properly fitted NIOSH approved air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. The filter class for the respirator must be suitable for the maximum expected contaminant concentration (gas/vapor/aerosol/particulates) that may arise when handling the product. If this concentration is exceeded, self-contained breathing apparatus must be used.
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sikaflex11 FC?
The signal word is danger.
What is Sikaflex11 FC used for?
For further information, refer to product data sheet.
What are the hazard statements for Sikaflex11 FC?
This substance has 4 hazard statements:
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H350: May cause cancer by inhalation.
- H373: May cause damage to organs (hearing organs) through prolonged or repeated exposure if inhaled.
What is the melting point of Sikaflex11 FC?
The melting point is No data available and the boiling point is No data available.