Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
LOCTITE MR 5922 is a paste substance commonly used sealant.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
Precautionary Statements
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P501: Dispose of contents/container in accordance with national regulation.
- P280: Wear protective gloves.
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Henkel Ltd
national supplier
Wood Lane End HP2 4RQ Hemel Hempstead Great Britain
GB
+44 1442 278000
+44 1442 278071
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+44 (0)1442 278497
GB
24 Hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| rosin EC: 232-475-7 | 8050-09-7 | 10-20% | ⚠️ Hazardous |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 10-20% | ⚠️ Hazardous |
| Titanium dioxide EC: 236-675-5 | 13463-67-7 | 1-5% | ✓ Non-hazardous |
Composition Notes
For full text of the H - statements and other abbreviations see section 16 "Other information". Substances without classification may have community workplace exposure limits available.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. If symptoms persist, seek medical advice.
🖐️ Skin Contact
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms:
Rash, Urticaria.
👁️ Eye Contact
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Symptoms:
Irritation, conjunctivitis.
🍽️ Ingestion/Swallowing
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
🚨 Immediate Medical Attention Required
See section: Description of first aid measures
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure good ventilation/extraction.
🧤 Hand Protection
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
👁️ Eye Protection
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.
😷 Respiratory Protection
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)
🦺 Skin/Body Protection
Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for LOCTITE MR 5922?
The signal word for this substance is "warning".
What is the solubility of LOCTITE MR 5922?
Partially soluble (23 C (73.4 F); Solvent: Water)
What is LOCTITE MR 5922 used for?
Sealant
What are the hazard statements for LOCTITE MR 5922?
This substance has 2 hazard statements: H317: May cause an allergic skin reaction. H319: Causes serious eye irritation.
What is the melting point of LOCTITE MR 5922?
The melting point is No data available / Not applicable and the boiling point is 82 C (179.6 F).