Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Rubio Monocoat Accelerator - component B
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- YM00-P0D6-F006-F5MW
Identified Uses
Intended for general public
Uses advised against
No additional information available
Manufacturers & Suppliers
Muylle Facon B.V.B.A. - Rubio Monocoat
manufacturer
Ambachtenstraat 58, B– 8870 Izegem, Belgium
+32 (0) 51 30 80 54
http://www.rubiomonocoat.com
Emergency Contacts
NSW Poisons Information Centre The Children's Hospital at Westmead
13 11 26
National Poisons Information Service (Belfast Centre) Royal Victoria Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hexamethylene diisocyanate oligomers EC: 931-274-8 | 28182-81-2 | 100% | Yes |
| 1,6-diisocyanatohexane EC: 212-485-8 | 822-06-0 | 0.1% | Yes |
Notes
Full text of H- and EUH-statements: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get immediate medical advice/attention.
If on skin : Wash with plenty of soap and water.
Symptoms: Repeated exposure may cause sensitization due to an allergic reaction of the skin.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Risk of serious damage to eyes.
Give nothing to drink. Do NOT induce vomiting. Ask for medical advice.
Symptoms: May cause lung damage if swallowed. Irritation of the stomach possible.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
During spraying wear suitable respiratory equipment.
Type: protective gloves, Material: Nitrile rubber (NBR), Permeation: 5 (> 240 minutes), Thickness (mm): >0,3, Standard: EN 374-2
Type: Safety glasses, Use: Droplet, Characteristics: With side shields, Standard: EN 166
Usually not necessary. In case of insufficient ventilation or spraying: Use approved mask with particle filter P2 (EN149). The filters have a limited service life (must be changed). Read the manufacturer's instructions. Device: approved mask with particle filter P2, Filter type: Type P2, Standard: EN 149
Wear anti-static discharges clothing and shoes. Foresee ground with earth. Impervious footwear must be worn.
Try to prevent the material from entering drains or water courses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Rubio Monocoat Accelerator - component B?
The signal word is warning.
What is the physical form of Rubio Monocoat Accelerator - component B?
Rubio Monocoat Accelerator - component B is a liquid appearing as liquid. with colourless. color. It has characteristic. odor.
What is the solubility of Rubio Monocoat Accelerator - component B?
Reacts with water.
What is Rubio Monocoat Accelerator - component B used for?
Intended for general public
What are the hazard statements for Rubio Monocoat Accelerator - component B?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of Rubio Monocoat Accelerator - component B?
The melting point is < -20 C and the boiling point is - 150 C.