Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- STABURAGS NBU 12 K
- Product Form
- Grease
- Product Code
- 017085
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
Klüber Lubrication München GmbH & Co. KG
manufacturer
Geisenhausenerstr. 7, 81379 München, Deutschland
+49 (0) 89 7876 0
Klüber Lubrication Belgium Netherlands
national supplier
Rue Cardinal Mercier 100, 7711 Dottignies, Belgium
+32 56 483333
Emergency Contacts
Antigifcentrum / Centre antipoisons
070 245 245
Emergency Contact
+49 89 7876 700
24 hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mineral oil. barium complex soap
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dibarium(2+) ion bis(9-(octadecylcar-bamoyl)nonanoate) decanedioate EC: 433-080-4 | --- | 30 - 50% | Yes |
| 4-ethyl-2-(8-heptadecenyl)-2-oxazoline-4-methanol EC: 268-820-3 | 68140-98-7 | 2.5 - 10% | Yes |
| pin-2(3)-ene EC: 201-291-9 | 80-56-8 | 0.1 - 0.25% | Yes |
| distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 50 - 70% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.
Symptoms: Headache, Nausea, Allergic appearance
Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Symptoms: May cause an allergic skin reaction.
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Seek medical advice.
Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Get medical attention immediately if irritation develops and persists (skin). Seek medical advice (inhalation, eye contact, ingestion).
Medical Treatment
The first aid procedure should be established in consultation with the doctor responsible for industrial medicine. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas.
Do not allow contact with soil, surface or ground water.
Clean up promptly by sweeping or vacuum.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. For personal protection see section 8. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not repack. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.
Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.
Wash face, hands and any exposed skin thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Material: Nitrile rubber; Break through time: > 10 min; Protective index: Class 1; Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses with side-shields
Not required; except in case of aerosol formation. Filter type: Filter type P
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
No conditions to be specially mentioned.
No materials to be especially mentioned.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil. Do not dispose of with domestic refuse. Dispose of as hazardous waste in compliance with local and national regulations.
Dispose of as hazardous waste in compliance with local and national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Take note of Directive 94/33/EC on the protection of young people at work or stricter national regulations, where applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for STABURAGS NBU 12 K?
The signal word is warning.
What is the physical form of STABURAGS NBU 12 K?
STABURAGS NBU 12 K is a paste with brown color. It has characteristic odor.
What is the solubility of STABURAGS NBU 12 K?
substance/mixture is non-soluble (in water)
What is STABURAGS NBU 12 K used for?
Grease
What are the hazard statements for STABURAGS NBU 12 K?
This substance has 2 hazard statements:
- H302 + H332: Harmful if swallowed or if inhaled.
- H317: May cause an allergic skin reaction.
What is the melting point of STABURAGS NBU 12 K?
The melting point is No data available and the boiling point is No data available.