NextSDS Logo
Safety Data Sheet EN

STABURAGS NBU 4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
STABURAGS NBU 4
Product Code
017050

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Grease

Uses advised against

Restricted to professional users.

Manufacturers & Suppliers

K

Klüber Lubrication München

manufacturer

Geisenhausenerstr. 7, 81379 München, Deutschland

+49 (0) 89 7876 0

K

Klüber Lubrication Belgium Netherlands

national supplier

Rue Cardinal Mercier 100, 7711 Dottignies, Belgium

+32 56 483333

Emergency Contacts

Antigifcentrum / Centre antipoisons

070 245 245

Emergency Contact

+49 89 7876 700

24 hrs

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mineral oil. barium complex soap

Chemical Name CAS Number Concentration Hazardous
pin-2(3)-ene EC: 201-291-9 80-56-8 0.1 - 0.25% Yes
distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7 64742-65-0 30 - 50% No
White mineral oil (petroleum) EC: 232-455-8 8042-47-5 30 - 50% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Get medical attention immediately if irritation develops and persists. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Symptoms: Allergic appearance

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

Ingestion

Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Get medical attention immediately if irritation develops and persists (skin).

Medical Treatment

The first aid procedure should be established in consultation with the doctor responsible for industrial medicine.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

High volume water jet

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Exposure to decomposition products may be a hazard to health.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas.

Environmental

Try to prevent the material from entering drains or water courses.

Cleanup methods

Clean up promptly by sweeping or vacuum.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. For personal protection see section 8. Persons with a history of skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not repack. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.

Storage

Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.

Hygiene

Wash face, hands and any exposed skin thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Material : Nitrile rubber, Break through time : > 10 min, Protective index : Class 1, Remarks : Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Eyes

Safety glasses with side-shields

Respiratory

Not required; except in case of aerosol formation. Filter type : Filter type P

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Odor
characteristic
Upper Explosive Limit
No data available
Freezing Point
---
Flash Point
Not applicable
Physical State Data
liquid
Bulk Density
No data available
Ph
Not applicable
Melting Point
No data available
Softening Point
---
Appearance
---
Flammability
Combustible Solids
State Under Standard Conditions
---
Kinematic Viscosity
Not applicable
Lower Explosive Limit
No data available
Solubility In Water
insoluble
Metal Corrosion
---
Physical State
paste
Form
---
Relative Density
0,96 (20 °C)
Cloud Point
---
Solubility
---
Explosive Limits
---
Solidification Point
---
Voc Content
---
Boiling Point
No data available
Colour Intensity
---
Molecular Weight
---
Vapor Density
---
Colour
beige
Auto Ignition Temperature
No data available
Odor Threshold
No data available
Dynamic Viscosity
No data available
Density
0,96 g/cm3(20 °C)
Crystallisation Point
---
Relative Evaporation Rate
---
Vapor Pressure
< 0,001 hPa (20 °C)
Evaporation Rate
No data available
Decomposition Temperature
No data available
Partition Coefficient
No data available
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No hazards to be specially mentioned.

Hazardous reactions

Hazardous reactions : No dangerous reaction known under conditions of normal use.

Avoid

Conditions to avoid : No conditions to be specially mentioned.

Incompatible

Materials to avoid : No materials to be especially mentioned.

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The product should not be allowed to enter drains, water courses or the soil. Do not dispose of with domestic refuse. Dispose of as hazardous waste in compliance with local and national regulations.

Disposal

Dispose of as hazardous waste in compliance with local and national regulations.

Waste Codes

12 01 12* used product, unused product, spent waxes and fats EWC
15 01 10 packaging containing residues of or contaminated by hazardous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated as a dangerous good
Shipping Name
Not regulated as a dangerous good
Transport Class
Not regulated as a dangerous good
Packing Group
Not regulated as a dangerous good
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for STABURAGS NBU 4?

The signal word is no signal word.

What is the physical form of STABURAGS NBU 4?

STABURAGS NBU 4 is a paste with beige color. It has characteristic odor.

What is STABURAGS NBU 4 used for?

Grease

What is the melting point of STABURAGS NBU 4?

The melting point is No data available and the boiling point is No data available.