Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aral Farolin-Series
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Aral Lubricants GmbH
manufacturer
Wittener Str. 45, D-44789 Bochum
Emergency Contacts
Aral Lubricants GmbH
0234/315-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Refined mineral oil
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Refined mineral oil | --- | --- | No |
Notes
Under authorized utilisation there is no danger in using this material, based upon today's knowledge.
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air; usually no further remedies are required. If symptoms persist obtain medical advice.
Wash skin with soap and water.
Symptoms: Skin irritation and the removal of skin fats.
Wash thoroughly with water for at least 10 minutes. Afterwards, promptly seek medical advice.
Do not induce vomiting, danger of aspiration. Immediately seek medical advice.
Immediate Medical Attention
Immediately seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, CO₂, dry powder, water fog and sand.
Water, never use water jets.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Change soaked clothes and shoes immediately. Avoid inhalation of vapour and mist.
If the product seeps into the surface water, drainage or underground inform the responsible authorities. Prevent seepage into the drainage system, cover drainage system.
Soak up leaked product with a suitable absorbent.
Materials: suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not spill the product. When handling heavy containers use safety gloves and appropriate tools. Avoid contact with eyes. If splashing is likely to occur wear a full face visor or chemical goggles as appropriate. Use oil resistant boots and safety gloves.
Keep containers closed. Keep away from heat sources. Store between +5° C and +40° C.
Keep away from heat and other sources of ignition. Combustion Class according to DIN EN 2: B.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Relevant local regulations should be needed when designing and operating technical equipment. Where excessive misting occurs, reduce through ventilation.
If at all possible, we recommend gloves made of a suitable plastic or other such material. Otherwise, use a suitable skin cream.
In case of spraying danger, use tightly fitting goggles.
Where excessive misting occurs, reduce through ventilation.
Wear oil resistant clothing in case of spraying danger. Preventative skin protection is necessary. After work clean and treat the skin.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition occurs when handled according to proper procedures.
This material reacts slowly or not at all with most chemicals.
None, under proper handling conditions.
Decomposition begins at higher temperatures.
Strong Oxidants.
None if stored and handled according to proper procedures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal or combustion should be performed with approved equipment.
Give the used material to an approved waste disposal company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No characterisation necessary. Danger determining component for labelling: None. R-sets: None. S-sets: None. Special characterization of specified mixtures according to the 'Preparation Guidelines EU', Appendix I: None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aral Farolin-Series?
The signal word is no signal word.
What is the physical form of Aral Farolin-Series?
Aral Farolin-Series is a liquid with astm colour code: 0,5-2,0 color. It has typical odor.