Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Straight Run Naphtha is a clear liquid. substance commonly used for use as a blending component in gasoline and as a feedstock in the petrochemical industry. other identified uses, for this product, can be found in section 15 of this esds..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H224: Extremely flammable liquid and vapour.
- H315: Causes skin irritation.
- May cause genetic defects.
- H350i: May cause cancer.
- Suspected of damaging fertility or the unborn child.
- H336: May cause drowsiness or dizziness.
- H304: May be fatal if swallowed and enters airways.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
- Take precautionary measures against static discharge.
- Use only non-sparking tools.
- Ground/bond container and receiving equipment.
- Use only outdoors or in a well-ventilated area.
- Avoid breathing mist or vapour.
- Wear protective gloves/protective clothing/eye protection/face protection.
- Avoid release to the environment.
- Collect spillage.
- IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician. Do NOT induce vomiting.
- IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- If skin irritation occurs: Get medical advice/attention.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists: Get medical advice/attention.
- IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or doctor/physician if you feel unwell.
- Store in a well-ventilated place. Keep container tightly closed.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Koch Supply & Trading Srl
global supplier
Route de Pre-bois Case Postale 1843 1215 Geneve 15 CH
CH
+001 316-828-5601
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
+001 703-527-3887
US
(Please reverse charges)
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
SubstanceGeneral Composition
Values shown are typical and may vary. This Safety Data Sheet (SDS) is intended to communicate potential hazards associated with the substance or mixture; it should not be used as a commercial specification sheet. For commercial specification information, contact your Koch representative.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cyclohexane EC: 203-806-2 | 110-82-7 | 7% | ✓ Non-hazardous |
| Benzene EC: 200-753-7 | 71-43-2 | 5% | ✓ Non-hazardous |
| Toluene EC: 203-625-9 | 108-88-3 | 5% | ✓ Non-hazardous |
| Xylene EC: 215-535-7 | 1330-20-7 | 5% | ✓ Non-hazardous |
| 1,2,4-Trimethyl benzene EC: 202-436-9 | 95-63-6 | 2% | ✓ Non-hazardous |
| Ethylbenzene EC: 202-849-4 | 100-41-4 | 2% | ✓ Non-hazardous |
| Hydrogen sulphide EC: 231-977-3 | 7783-06-4 | 0.002% | ✓ Non-hazardous |
| Naphtha (Petroleum), Full-Range Straight Run EC: 265-042-6 | 64741-42-0 | 100% | ⚠️ Hazardous |
| n-Hexane EC: 203-777-6 | 110-54-3 | 15% | ✓ Non-hazardous |
| Butane, branched and linear EC: 271-009-7 | 68513-65-5 | 8% | ✓ Non-hazardous |
Composition Notes
The full text for all R- and H-phrases is displayed in section 16. All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. Additional compounds which may be formed during processing are listed in Section 8.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. If breathing is difficult, give oxygen. Get medical attention if discomfort develops or persists.
Symptoms:
headache, nausea, vomiting and an altered state of consciousness.
🖐️ Skin Contact
Immediately remove contaminated clothing. Wash with soap and water. Continue to rinse for at least 15 minutes. In case of rashes, wounds or other skin disorders: Seek medical attention and bring along these instructions.
Symptoms:
rashes, wounds or other skin disorders
👁️ Eye Contact
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids wide apart. Get medical attention if irritation develops or persists.
Symptoms:
irritation
🍽️ Ingestion/Swallowing
Immediately rinse mouth and drink plenty of water or milk. Keep person under observation. Do not induce vomiting. If vomiting occurs, keep head low. Transport immediately to hospital and take these instructions.
🚨 Immediate Medical Attention Required
Transport immediately to hospital and take these instructions.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide adequate ventilation. Observe Occupational Exposure Limits and minimise the risk of inhalation of vapours. Provide easy access to water supply and eye wash facilities. Use explosion-proof equipment.
🧤 Hand Protection
Wear protective gloves. Suitability and durability of a glove is dependent upon usage (frequency and duration of contact), chemical resistance of glove material, and glove thickness. Nitrile gloves (minimum 0.38 mm thickness) are recommended, but be aware that the liquid may penetrate the gloves. Frequent change is advisable. Select Nitrile gloves tested to EN374 with breakthrough time of >240 minutes. For short-term, incidental contact, PVC gloves (minimum 1.3 mm thickness with breakthrough time of >60 minutes) may be suitable. Suitable gloves meeting these recommendations can be obtained from a glove supplier.
👁️ Eye Protection
Wear goggles/face shield.
😷 Respiratory Protection
In case of inadequate ventilation or risk of inhalation of vapours, use suitable respiratory equipment with gas filter (type A2). Wear air-supplied mask in confined areas. Seek advice from local supervisor.
🦺 Skin/Body Protection
Protection suit must be worn. Anti-static and flame-retardant protective clothing is recommended.
🌍 Environmental Exposure Controls
Contain spills and prevent releases and observe national regulations on emissions.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1268
📦 Proper Shipping Name
Petroleum distillates, n.o.s. (Naphtha (petroleum), full-range straight-run)
⚠️ Transport Hazard Class
3
📋 Packing Group
I
🚛 ADR Transport Precautions
Read safety instructions, SDS and emergency procedures before handling.
🚢 IMDG Maritime Transport Precautions
Read safety instructions, SDS and emergency procedures before handling.
✈️ IATA Air Transport Precautions
Read safety instructions, SDS and emergency procedures before handling.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Straight Run Naphtha?
The signal word for this substance is "danger".
What is the physical form of Straight Run Naphtha?
Straight Run Naphtha is a liquid. appearing as clear liquid. with colourless. color. It has solvent odor. odor.
What is Straight Run Naphtha used for?
For use as a blending component in gasoline and as a feedstock in the petrochemical industry. Other identified uses, for this product, can be found in section 15 of this eSDS.
What are the hazard statements for Straight Run Naphtha?
This substance has 8 hazard statements: H224: Extremely flammable liquid and vapour. H315: Causes skin irritation. May cause genetic defects. H350i: May cause cancer. Suspected of damaging fertility or the unborn child. H336: May cause drowsiness or dizziness. H304: May be fatal if swallowed and enters airways. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Straight Run Naphtha?
The melting point is Not available. and the boiling point is -20 - 220 C (-4 - 428 F).