NextSDS Logo
Wa

WaveTrace [TM] Solvent KT

DANGER liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
WaveTrace [TM] Solvent KT
Product Code
43503

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Overview

WaveTrace [TM] Solvent KT .

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Flam. Liq. Category 2 H226
Acute Tox. Category 3 H301
Acute Tox. Category 3 H331
Acute Tox. Category 3 H311
Eye Dam. Category 1
Repr. Category 1B H360
STOT SE Category 1
STOT RE Category 2 H373

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS06 GHS Hazard Pictogram: Acute toxicity hazard - Poisonous materials that can cause death or serious harm

GHS06

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H226: Flammable liquid and vapor.
  • H301: Toxic if swallowed.
  • H311: Toxic in contact with skin.
  • H331: Toxic if inhaled.
  • H360: May damage fertility or the unborn child.
  • H373: May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

  • P201: Obtain special instructions before use.
  • P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
  • P260: Do not breathe dust/fume/gas/mist/vapors/spray.
  • P280: Wear protective gloves/eye protection/face protection.
  • P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
  • P307+P311: IF exposed: Call a POISON CENTER or doctor/physician.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Quveon, Inc.

undefined

๐Ÿ“

599 Raleigh Road Suite C Henderson, NC 27536

๐ŸŒ

US

๐Ÿ“ž

1 800 471 3575

๐Ÿ“ 

1 213 283 3909

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

1 800 424 9300

๐ŸŒ

US

๐Ÿ’ก

(CCN812765)

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
1methoxy2propanol 107982 80-95% โš ๏ธ Hazardous
Chloroform 67663 5-30% โš ๏ธ Hazardous
Sulfur Dioxide 7446095 5-10% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

If breathed in, move the person to fresh air. If not breathing, give artificial respiration. Consult a physician.

๐Ÿ–๏ธ Skin Contact

Wash off with soap and plenty of water. Take the victim to hospital. Consult a physician.

๐Ÿ‘๏ธ Eye Contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

๐Ÿฝ๏ธ Ingestion/Swallowing

Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

๐Ÿšจ Immediate Medical Attention Required

Consult a physician. Take the victim to hospital (for skin contact).

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
colorless or with light yellow color
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
liquid
๐Ÿ‘ƒ Odor
Not available
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
5.0 6.0 at 20 C (68 F)
๐ŸงŠ Melting Point
no data available
Critical Property
๐Ÿ’จ Boiling Point
120 C (248 F) at 1013 hPa (760 mmHg)
Critical Property
๐Ÿ”ฅ Flash Point
no data available
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐Ÿ’จ Vapor Pressure
Not available
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
Not available
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
1.120 g/cm3
Critical Property
๐Ÿ”ฅ Flammability
Not available
๐Ÿ“Š Upper Explosive Limit
Not available
๐Ÿ“Š Lower Explosive Limit
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
no data available
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not available
๐Ÿ“Š Solubility In Water
no data available
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosionproof ventilation equipment.

๐Ÿงค Hand Protection

Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with the product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

๐Ÿ‘๏ธ Eye Protection

Tightly fitting safety goggles. Face shield. Use equipment for eye protection tested and approved under appropriate government standards.

๐Ÿ˜ท Respiratory Protection

Where risk assessment shows air purifying respirators are appropriate, use a fullface respirator with multipurpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a fullface supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

๐Ÿฆบ Skin/Body Protection

Complete suit protecting against chemicals, flame retardant antistatic protective clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

3092

๐Ÿ“ฆ Proper Shipping Name

1Methoxy2propanol, solution

โš ๏ธ Transport Hazard Class

3 (6.1)

๐Ÿ“‹ Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for WaveTrace [TM] Solvent KT?

The signal word for this substance is "danger".

What is the physical form of WaveTrace [TM] Solvent KT?

WaveTrace [TM] Solvent KT is a liquid with colorless or with light yellow color color.

What are the hazard statements for WaveTrace [TM] Solvent KT?

This substance has 6 hazard statements: H226: Flammable liquid and vapor. H301: Toxic if swallowed. H311: Toxic in contact with skin. H331: Toxic if inhaled. H360: May damage fertility or the unborn child. H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of WaveTrace [TM] Solvent KT?

The melting point is no data available and the boiling point is 120 C (248 F) at 1013 hPa (760 mmHg).