Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE LB 8040 PENETRATING OIL
- Product Code
- 996456
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Rust dissolver
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
(860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Heptane | 142-82-5 | 10 - 30% | Yes |
| Methanol | 67-56-1 | 1 - 5% | Yes |
| Norflurane | 811-97-2 | 30 - 60% | Yes |
| Propane | 74-98-6 | 1 - 5% | Yes |
| Butane | 106-97-8 | 10 - 30% | Yes |
| Kerosine | 64742-81-0 | 5 - 10% | Yes |
Notes
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Wash affected area immediately with soap and water. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Do not induce vomiting: contains petroleum distillates and/or aromatic solvents. Aspiration may cause pulmonary edema and pneumonitis. Get immediate medical attention.
Symptoms: Aspiration may cause pulmonary edema and pneumonitis.
Immediate Medical Attention
Get immediate medical attention.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.
Use impermeable gloves as necessary to prevent skin contact.
Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists.
Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Use protective clothing as necessary to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Not available.
Will not occur.
Extremes of temperature and direct sunlight.
Oxidizing agents.
Oxides of carbon.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.2
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE LB 8040 PENETRATING OIL?
The signal word is danger.
What is the physical form of LOCTITE LB 8040 PENETRATING OIL?
LOCTITE LB 8040 PENETRATING OIL is a aerosol, liquid with colorless color. It has kerosene odor.
What is LOCTITE LB 8040 PENETRATING OIL used for?
Rust dissolver
What are the hazard statements for LOCTITE LB 8040 PENETRATING OIL?
This substance has 4 hazard statements:
- H304: MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of LOCTITE LB 8040 PENETRATING OIL?
The melting point is Not available. and the boiling point is > 37.0 °C (> 98.6 °F).