BRUSHING THINNERS

Move injured person into fresh air immediately. Call an ambulance. Bring these instructions. Place unconscious person on the side in the recovery position and ensure breathing can take place.

Symptoms: lung oedema (shortness of breath)

Remove contaminated clothing immediately and wash skin with soap and water. Consult a physician for specific advice. Burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital.

Symptoms: Burns

Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyes wide apart. Immediately transport to hospital or eye specialist.

Immediately rinse mouth and drink plenty of water or milk. Keep person under observation. Do not induce vomiting. If vomiting occurs, keep head low. Transport immediately to hospital and take these instructions.

Use fire-extinguishing media appropriate for surrounding materials.

In case of fire, toxic and corrosive gases may be formed.

Beware, risk of formation of toxic and corrosive gases.

In case of spills, beware of slippery floors and surfaces.

The product should not be dumped in nature but collected and delivered according to agreement with the local authorities.

Absorb spillage with non-combustible, absorbent material.

Materials: non-combustible, absorbent material

Read and follow manufacturer's recommendations. Always remove grease with soap and water or skin cleaning agent, never use organic solvents. Good personal hygiene is necessary. Wash hands and contaminated areas with water and soap before leaving the work site. Do not eat, drink or smoke when using the product.

Store in tightly closed original container in a dry, cool and well-ventilated place.

Wash hands and contaminated areas with water and soap before leaving the work site. Do not eat, drink or smoke when using the product.

Keep away from heat, sparks and open flame.

Use engineering controls to reduce air contamination to permissible exposure level. Provide adequate ventilation, including appropriate local extraction, to ensure that the defined workplace exposure limit is not exceeded.

The most suitable glove must be chosen in consultation with the gloves supplier, who can inform about the breakthrough time of the glove material. Protection against this substance requires special consideration.

Wear tight-fitting goggles or face shield.

Wear suitable respiratory protection. Check that mask fits tight and change filter regularly.

Protection suit must be worn.

No particular stability concerns.

Absorb spillage with non-combustible, absorbent material.

Dispose of waste and residues in accordance with local authority requirements. Only experts should be permitted to carry out disposal of this material.