Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SF 7031
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
activator
Manufacturers & Suppliers
Henkel Ltd
Wood Lane End HP2 4RQ Hemel Hempstead Great Britain
+44 (1442) 278000
Emergency Contacts
Emergency Contact
+44 (0)1442 278497
24 Hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Primer
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| gehydrogeneerde nafta met laag kookpunt (conc benzeen < 0.1%) EC: 265-151-9 | 64742-49-0 | 50 - 100% | Yes |
| opaan EC: 200-827-9 | 74-98-6 | 10 - 20% | Yes |
| Cyclohexane stof waarvoor binnen de Gemeenschap een blootstellingsgrens op de werkvloer geldt EC: 203-806-2 | 110-82-7 | 5 - 10% | Yes |
| Hexane (mixture of isomers) EC: 203-777-6 | 110-54-3 | 0.3 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Symptoms: Vapors may cause drowsiness and dizziness.
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms: Redness, inflammation.
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Symptoms: Prolonged or repeated contact may cause eye irritation.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/extraction.
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to> 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Wear protective glasses. Protective eye equipment should conform to EN166.
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)
Suitable protective clothing Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Transport Class
- 2.1
not applicable
not applicable
not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SF 7031?
The signal word is danger.
What is the physical form of LOCTITE SF 7031?
LOCTITE SF 7031 is a liquid appearing as liquid colourless with colourless color. It has pungent odor.
What is the solubility of LOCTITE SF 7031?
No data available / Not applicable
What is LOCTITE SF 7031 used for?
activator
What are the hazard statements for LOCTITE SF 7031?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LOCTITE SF 7031?
The melting point is No data available / Not applicable and the boiling point is 97 - 99 (206.6 - 210.2 F).