Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lithium/Sulfuryl Chloride(Li/SO₂Cl₂) Cells & Batteries
- Product Code
- EXIUM, PGDD10A, PGD010A, PGC010A, PGAA16A, PGAA10A
- Chemical Name
- Lithium/Sulfuryl Chloride(Li/SO₂Cl₂)
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Vitzrocell, Co. Ltd
manufacturer
256-41 Dugok-ri, Sinam-myon, Yesan-gun, ChungCheong Nam-Do
+82-41-332-8642~5
www.vitzrocell.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, rest and keep warm. In severe cases, obtain medical attention.
Wash off skin thoroughly with flow water for 10~15 minutes and obtain medical attention.
Irrigate thoroughly with Water for at least 15 minutes and obtain medical attention.
Drink copious amounts of water (or milk). Seek medical attention immediately.
Immediate Medical Attention
Seek immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Copious amounts of water. Lith-X powder, Class D fire extinguisher, Dry Lithium Chloride, Graphite powder, and Pyrene 1
CO2, Class ABC, or Soda Ash type extinguisher
Do not short circuit, recharge, over charge (discharge below 0.0 volts), puncture, crush, or expose to temperatures above the manufacture rated temperature. Cells may leak, vent, or explode. Touching the positive and negative poles with a conductive metal will quickly result in heat buildup and potential vent or explosio
Cover with Lith-X powder, Class D fire extinguisher, dry lithium chloride, or graphite powder.
Firefighter Protection
Wear protective breathing apparatus such as SCBA (self contained breathing apparatus) or Air Purifying Respirator using NIOSH approved acid gas filter cartridges.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapours or touch liquid with bare hand. If the skin has come into contact with the electrolyte, take an action in accordance with 4. First Aid Measures.
absorb the exudation, seal leaking battery and graphite powder in plastic bag
Materials: Graphite powder, plastic bag
Related Products
Similar products with comparable safety profiles
SLI-Batteries (Lead-acid battery filled with dilute sulphuric acid)
---
SSB Lithium Batteries, Fusion Lithium Batteries
---
LITHIUM - ION BATTERY
---
Lithium ion rechargeable battery cell
---
Lithium ion rechargeable battery cell
---
3VLithium / Manganese Cell
---
Lithium primary cylindrical cell
---
Lithium primary cylindrical cell
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
This cell is a primary cell and or not designed to be charged or recharge. To do so may cause the cell to leak or explode. Avoid short-circuiting. If soldering or welding to the terminals or case of the cell(battery) is required, exercise proper precautions to prevent damage to cell which may result in loss of cell capacity, seal, leakage, and/or cell explosion. Do not solder to case.
Cells and packs should be stored at room temperature (approx 21 deg C or 70 deg F). Do not store batteries in high humidity environments for long periods as high temperatures will degrade performance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In leakage situations, use specific gloves for leaking chemical substance and heat prevention.
Use safety goggles or face shield which can separate eyes and the outside for chemical substance and heat prevention.
In all fire situations, use filter mask or self-contained breathing Apparatus for harmful gases or other material prevention.
Additional equipments are needed to prevent from chemical substance, harmful material and heat. (Clothes, boots etc.)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Lithium has vigorous reaction with water, forming a caustic hydroxide.
Do not encapsulate (potting of these cells), and do not charge or recharge this lithium battery.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with appropriate federal, state, and local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3090
- Shipping Name
- Lithium batteries
- Transport Class
- Class9
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lithium/Sulfuryl Chloride(Li/SO₂Cl₂) Cells & Batteries?
The signal word is no signal word.
What is the physical form of Lithium/Sulfuryl Chloride(Li/SO₂Cl₂) Cells & Batteries?
Lithium/Sulfuryl Chloride(Li/SO₂Cl₂) Cells & Batteries is a solid appearing as cylindrical shape . It has odourless. if leaking, gives off a pungent and corrosive odour. odor.
What is the solubility of Lithium/Sulfuryl Chloride(Li/SO₂Cl₂) Cells & Batteries?
Not applicable (Unless individual components exposed)