NextSDS Logo
Safety Data Sheet EN

Ortho Solo Stick

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ortho Solo Stick
Product Form
Paste.

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Dental product: Bonding agent. Professional applications.

Manufacturers & Suppliers

O

Ormco Corporation

manufacturer

1717 West Collins Avenue Orange, CA 92867

1-800-854-1741

Emergency Contacts

CHEMTREC

1-800-424-9300

24 hours

CHEMTREC

+1-703-527-3887

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
STOT SE Cat. 3
STOT RE Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Causes damage to organs through prolonged or repeated exposure. (bones, liver, teeth)

Precautionary Statements

Wear protective gloves.
Wear eye or face protection.
Use only outdoors or in a wellventilated area.
Do not breathe dust.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace.
Get medical attention if you feel unwell.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER or physician if you feel unwell.
IF ON SKIN: Wash with plenty of soap and water.
Wash contaminated clothing before reuse.
If skin irritation or rash occurs: Get medical attention.
IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical attention.
Store locked up.
Dispose of contents and container in accordance with all local, regional, national and international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture
Chemical Name CAS Number Concentration Hazardous
2-hydroxyethylmethacrylaat (Noot D) EC: 212-782-2 868-77-9 30 - 60% No
2-hydroxy-1,3-propanediyl bismethacrylate EC: 217-388-4 1830-78-0 5 - 10% No
Ethanol 95-97% (v/v) (denatured with 5% methanol) EC: 200-578-6 64-17-5 1 - 5% No
3-Methacryloxiy- propyltrimethoxysilane EC: 219-785-8 2530-85-0 1 - 5% No
alkali fluorosilicates(Na) EC: 240-934-8 16893-85-9 0.1 - 1% No

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health and hence require reporting in this section.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

No special measures required. If inhaled, remove to fresh air. Get medical attention if symptoms occur.

Symptoms: Adverse symptoms may include the following: respiratory tract irritation, coughing

Skin contact

No special measures required. In case of contact, immediately flush skin with plenty of water. Get medical attention if symptoms occur.

Symptoms: Adverse symptoms may include the following: irritation, redness, dryness, cracking

Eye contact

No special measures are required. In case of contact with eyes, rinse immediately with plenty of water. Get medical attention if symptoms occur.

Symptoms: Adverse symptoms may include the following: pain or irritation, watering, redness

Ingestion

Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Get medical attention if adverse health effects persist or are severe.

Symptoms: No specific data.

Immediate Medical Attention

Get medical attention if symptoms occur (for eye, inhalation, skin contact). Get medical attention if adverse health effects persist or are severe (for ingestion).

Medical Treatment

No specific treatment.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special measures are required for small quantities under normal and intended conditions of product use.

Eyes

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles.

Environmental

No special measures are required for small quantities under normal and intended conditions of product use.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid. [Paste.]
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
Pale yellow.
Colour Intensity
---
Form
---
Odor
Fruity.
Odor Threshold
Not available.
Ph
Not available.
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
18 C (64 F ) Ethanol
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
1.25 [Water = 1]
Bulk Density
---
Density
---
Flammability
Not available.
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
Partially soluble in the following materials: cold water and hot water.
Partition Coefficient
Not available.
Solubility In Water
Not available.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ortho Solo Stick?

The signal word is danger.

What is the physical form of Ortho Solo Stick?

Ortho Solo Stick is a solid. [paste.] with pale yellow. color. It has fruity. odor.

What is the solubility of Ortho Solo Stick?

Partially soluble in the following materials: cold water and hot water.

What is Ortho Solo Stick used for?

Dental product: Bonding agent. Professional applications.

What are the hazard statements for Ortho Solo Stick?

This substance has 5 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • Causes damage to organs through prolonged or repeated exposure. (bones, liver, teeth)

What is the melting point of Ortho Solo Stick?

The melting point is Not available. and the boiling point is Not available..

Compliance Scan

Free compliance check