Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
SCALE TECT FG is a light yellow substance commonly used descaler..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H314: Causes severe skin burns and eye damage
Precautionary Statements
- P260: Do not breathe mist/spray.
- P280: Wear protective gloves/protective clothing/eye protection.
- P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- P310: Immediately call a POISON CENTER or doctor
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
NCH UK & Ireland
undefined
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
01902 510200
GB
(available during Office Hours)
Emergency Contact
01 809 2166
IE
(available from 8am to 10pm daily)
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| melkzuur EC: 200-018-0 | 50-21-5 | 25-50% | ⚠️ Hazardous |
| FORMIC ACID EC: 200-579-1 | 64-18-6 | 3-5% | ⚠️ Hazardous |
| ALKYLPOLYGLYCOSIDE C8-10 EC: 500-220-1 | 68515-73-1 | 1-3% | ⚠️ Hazardous |
| ALCOHOLS, C12-15-BRANCHED AND LINEAR, ETHOXYLATED PROPOXYLATED (> 2.5 MOLS EO/PO) EC: 639-733-1 | 120313-48-6 | 1% | ⚠️ Hazardous |
Composition Notes
For any H statements mentioned in this section, see the full text in section 16. This mixture contains substances with a Community workplace exposure limit. Note B - Some substances (acids, bases, etc.) are placed on the market in aqueous solutions at various concentrations and, therefore, these solutions require different labelling since the hazards vary at different concentrations.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. Get medical attention immediately.
Symptoms:
Inhalation may result in irritation or burns to the respiratory tract.
🖐️ Skin Contact
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Get medical attention if irritation develops and persists.
Symptoms:
Corrosive, Causes burns and possible deep ulcerations or scarring.
👁️ Eye Contact
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.
Symptoms:
Corrosive. Causes burns and may lead to corneal damage and possible blindness.
🍽️ Ingestion/Swallowing
Rinse mouth with water. Do NOT induce vomiting. Drink 1 or 2 glasses of water. If swallowed, seek medical advice immediately and show this container or label.
Symptoms:
Ingestion may result in severe burns to the mouth, throat and digestive tract.
🚨 Immediate Medical Attention Required
Get medical attention immediately (for inhalation). If swallowed, seek medical advice immediately. Get medical attention if irritation develops and persists (for eye/skin contact).
Medical Treatment
Treat symptomatically. The product causes burns of eyes, skin and mucous membranes.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure adequate ventilation, especially in confined areas.
🧤 Hand Protection
Wear suitable protective gloves conforming to EN 374. Type of gloves suggested :. Short term use eg occasional contact or splash protection ;. Nitrile rubber (0.4 mm). Long term use eg continuous wear or immersion ;. Solvent-resistant gloves (butyl-rubber). Fluorinated rubber. Suitability and durability of a glove is dependent upon usage factors such as frequency, duration of use, temperature and chemical resistance. The use of a chemical-protective glove may in practice be much shorter than the permeation time determined through testing. For break through times, refer to glove manufacturers recommendations.
👁️ Eye Protection
Safety glasses with side-shields. Approved to EN 166. For large volumes, faceshields should be used.
😷 Respiratory Protection
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. Conforming to EN 143 - P2 / P3 Particle filters. In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.
🦺 Skin/Body Protection
In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN3265
📦 Proper Shipping Name
Corrosive liquid, acidic, organic, n.o.s.
⚠️ Transport Hazard Class
8
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for SCALE TECT FG?
The signal word for this substance is "danger".
What is the physical form of SCALE TECT FG?
SCALE TECT FG is a liquid appearing as light yellow with light yellow color. It has characteristic odor.
What is the solubility of SCALE TECT FG?
Soluble in water
What is SCALE TECT FG used for?
Descaler.
What are the hazard statements for SCALE TECT FG?
This substance has 1 hazard statements: H314: Causes severe skin burns and eye damage
What is the melting point of SCALE TECT FG?
The melting point is No information available and the boiling point is No information available.