Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
SOLVO KLEEN 40 is a colourless substance commonly used solvent degreaser..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapour
- H304: May be fatal if swallowed and enters airways
- H411: Toxic to aquatic life with long lasting effects
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
- P273: Avoid release to the environment
- P301 + P310: IF SWALLOWED: Immediately call a POISON CENTRE or doctor.
- P331: Do NOT induce vomiting
- P370 + P378: In case of fire, use water spray/foam/chemical powder to extinguish.
- P391: Collect spillage
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
NCH UK & Ireland
national supplier
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
01902 510200
GB
available during Office Hours
Emergency Contact
01 809 2166
IE
available from 8am to 10pm daily
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| HYDROCARBONS, C10-C12, ISOALKANES, < 2% AROMATICS EC: 923-037-2 | N/A | 50-100% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If problems with breathing occur, move to fresh air. If symptoms persist, call a doctor. If exposed to high concentrations of the vapours / mists, move to fresh air.
Symptoms:
Inhalation of mists may result in irritation to the respiratory tract. May cause headaches, dizziness, drowsiness and nausea.
🖐️ Skin Contact
Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Get medical attention if irritation develops and persists.
Symptoms:
Prolonged contact will dry and defat the skin and may cause irritation such as itching and redness.
👁️ Eye Contact
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a doctor immediately.
Symptoms:
May cause irritation as itching and redness.
🍽️ Ingestion/Swallowing
Rinse mouth with water. If swallowed, do not induce vomiting - seek medical advice.
Symptoms:
Aspiration into lungs on ingestion or vomiting may cause bronochopneumonia or pulmonary oedema which can be fatal.
🚨 Immediate Medical Attention Required
Aspiration hazard if swallowed - can enter lungs and cause damage.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Local ventilation is suggested to control exposure from operations that can generate significant levels of vapour, mist or fumes. Ensure adequate ventilation, especially in confined areas.
🧤 Hand Protection
Wear suitable protective gloves conforming to EN 374. Type of gloves suggested :. Solvent-resistant gloves (butyl-rubber). Fluorinated rubber. Polyvinyl alcohol. Minimum breakthrough time of the glove material (protective index 4, breakthrough time: >120 min). Suitability and durability of a glove is dependent upon usage factors such as frequency, duration of use, temperature and chemical resistance. The use of a chemical-protective glove may in practice be much shorter than the permeation time determined through testing. For break through times, refer to glove manufacturers recommendations.
👁️ Eye Protection
Safety glasses if the method of use presents the likelihood of eye contact. Approved to EN 166.
😷 Respiratory Protection
In case of inadequate ventilation wear respiratory protection. Conforming to EN 14387 (organic vapours). Do not breathe vapours or spray mist.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN3295
📦 Proper Shipping Name
Hydrocarbons, liquid, n.o.s.
⚠️ Transport Hazard Class
3
📋 Packing Group
III
🚛 ADR Transport Precautions
No special precautions.
🚢 IMDG Maritime Transport Precautions
No special precautions.
✈️ IATA Air Transport Precautions
No special precautions.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for SOLVO KLEEN 40?
The signal word for this substance is "danger".
What is the physical form of SOLVO KLEEN 40?
SOLVO KLEEN 40 is a liquid appearing as colourless with colourless color. It has hydrocarbon odor.
What is SOLVO KLEEN 40 used for?
Solvent degreaser.
What are the hazard statements for SOLVO KLEEN 40?
This substance has 3 hazard statements: H226: Flammable liquid and vapour H304: May be fatal if swallowed and enters airways H411: Toxic to aquatic life with long lasting effects
What is the melting point of SOLVO KLEEN 40?
The melting point is No data available and the boiling point is 160 - 200 C.