Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Tectyl 502-C is a viscous substance commonly used corrosion inhibitor.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P261: Avoid breathing vapours.
- P261: Avoid breathing spray.
- P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
- P331: Do NOT induce vomiting.
- P370 + P378: In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Ellis Enterprises B.V., an affiliate of Valvoline
undefined
Wieldrechtseweg 39 3316 BG Dordrecht Netherlands
NL
+31 (0)78 654 3500
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+1-800-VALVOLINE (+1-800-825-8654)
US
Emergency Contact
070/245.245
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Koolwaterstoffen C9-C11, n-alkanen, iso-alkanen, cyclische, <2% aromaten EC: 918-481-9 | 64742-48-9 | 25-40% | ⚠️ Hazardous |
| Baseoil - unspecified EC: 265-158-7 | 64742-55-8 | 15-25% | ⚠️ Hazardous |
| Sulfonsuren, Erdl-, Natriumsalze EC: 271-781-5 | 68608-26-4 | 5-10% | ⚠️ Hazardous |
| Met waterstof behandelde, zware parafinische petroleumdestillaten EC: 265-157-1 | 64742-54-7 | 15-25% | ✓ Non-hazardous |
| Petrolatum, Micro Soft Wax EC: 232-373-2 | 8009-03-8 | 10-15% | ✓ Non-hazardous |
| Destillate (Erdl), mit Wasserstoff behandelte leichte naphthenhaltige EC: 265-156-6 | 64742-53-6 | 2.5-5% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. If unconscious, place in recovery position and seek medical advice. Consult a physician after significant exposure.
🖐️ Skin Contact
If on skin, rinse well with water. First aid is not normally required. However, it is recommended that exposed areas be cleaned by washing with soap and water. If on clothes, remove clothes.
Symptoms:
Repeated exposure may cause skin dryness or cracking.
👁️ Eye Contact
Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. If eye irritation persists, consult a specialist.
🍽️ Ingestion/Swallowing
Obtain medical attention. Do NOT induce vomiting. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.
Symptoms:
May be fatal if swallowed and enters airways.
🚨 Immediate Medical Attention Required
No hazards which require special first aid measures.
Medical Treatment
No hazards which require special first aid measures.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below exposure guidelines (if applicable) or below levels that cause known, suspected or apparent adverse effects.
🧤 Hand Protection
Nitrile rubber Neoprene gloves The suitability for a specific workplace should be discussed with the producers of the protective gloves.
👁️ Eye Protection
Not required under normal conditions of use. Wear splash-proof safety goggles if material could be misted or splashed into eyes.
😷 Respiratory Protection
In the case of vapour formation use a respirator with an approved filter. No personal respiratory protective equipment normally required.
🦺 Skin/Body Protection
Wear as appropriate: Impervious clothing Safety shoes Flame-resistant clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 1139
📦 Proper Shipping Name
COATING SOLUTION
⚠️ Transport Hazard Class
3
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Tectyl 502-C?
The signal word for this substance is "danger".
What is Tectyl 502-C used for?
Corrosion inhibitor
What are the hazard statements for Tectyl 502-C?
This substance has 3 hazard statements: H226: Flammable liquid and vapour. H304: May be fatal if swallowed and enters airways. H336: May cause drowsiness or dizziness.
What is the melting point of Tectyl 502-C?
The melting point is < -20 C and the boiling point is > 140 C.