Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
MR 68 NF Penetrant red and fluorescent Aerosol commonly used testing material for nondestructive surface crack detection.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
MR Chemie GmbH
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
1 800 424 9300
US
Day or Night
within USA and Canada
Emergency Contact
001 703 527 3887
US
Outside USA and Canada
Emergency Contact
0800-181-7059
DE
In-Country Emergency Number for: Germany
Emergency Contact
4001 204937
CN
Languages: ZH
In-Country Emergency Number for: China
Emergency Contact
800 968 793
HK
Languages: ZH
In-Country Emergency Number for: Hong Kong
Emergency Contact
000 800 100 7141
IN
Languages: HI
In-Country Emergency Number for: India
Emergency Contact
0 800 983 611
ZA
Languages: EN
In-Country Emergency Number for: South Africa
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureGeneral Composition
Mixture of substances listed below with nonhazardous additions.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| BUTYL DIGLYCOL EC: 203-961-6 | 112-34-5 | 40-50% | ⚠️ Hazardous |
| Butane EC: 203-448-7 | 106-97-8 | 25-30% | ⚠️ Hazardous |
| Propane EC: 200-827-9 | 74-98-6 | 15-20% | ⚠️ Hazardous |
| 2-Methoxy-methylethoxy-propanol EC: 252-104-2 | 34590-94-8 | 5-10% | ⚠️ Hazardous |
| 2,2',2"-nitrilotriethanol EC: 203-049-8 | 102-71-6 | 1-5% | ⚠️ Hazardous |
| 3',6'-Bis(diethylamino)spiro(isobenzofuran-1(3H),9'-(9H)xanthen)-3-on EC: 208-096-8 | 509-34-2 | 1-5% | ⚠️ Hazardous |
Additional Information
For the wording of the listed hazard phrases refer to section 16.
Composition Notes
Propellant: Propane-Butane
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air; consult doctor in case of complaints.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
Not relevant - aerosol can.
Symptoms:
Not relevant - aerosol can.
🚨 Immediate Medical Attention Required
No further relevant information available.
Medical Treatment
Grease with skin-cream to restore fat film in order to prevent skin inflammation.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
For good ventilation provide, this can be achieved by local or space exhaust.
🧤 Hand Protection
Check the permeability prior to each anewed use of the glove. For the protection against chemicals in areas with heightened risk of injury (mechanical hazard) no recommendation for a suitable glove material can be given. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Nitrile rubber, NBR, Fluorocarbon rubber (Viton). Recommended thickness of the material: 0.5 mm. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: Value for the permeation: Level 6. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
👁️ Eye Protection
Safety glasses
😷 Respiratory Protection
Filter AX. For good ventilation provide, this can be achieved by local or space exhaust. If the concentration lies over the job limit values, then, a certified respirator suitable for this purpose must be used.
🦺 Skin/Body Protection
Protective work clothing
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1950
📦 Proper Shipping Name
AEROSOLS
📋 Packing Group
Void
🚢 IMDG Maritime Transport Precautions
Warning: Gases.
✈️ IATA Air Transport Precautions
Warning: Gases.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for MR 68 NF Penetrant red and fluorescent Aerosol?
The signal word for this substance is "danger".
What is the physical form of MR 68 NF Penetrant red and fluorescent Aerosol?
MR 68 NF Penetrant red and fluorescent Aerosol is a aerosol with red color. It has characteristic odor.
What is MR 68 NF Penetrant red and fluorescent Aerosol used for?
Testing material for nondestructive surface crack detection
What are the hazard statements for MR 68 NF Penetrant red and fluorescent Aerosol?
This substance has 2 hazard statements: H222: Extremely flammable aerosol. Pressurised container: May burst if heated. H319: Causes serious eye irritation.
What is the melting point of MR 68 NF Penetrant red and fluorescent Aerosol?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..