Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology. commonly used construction and decoration surface intended for indoor use, primarily as a worktop in kitchens and baths, flooring, sinks, shower trays, wall panelling, and other similar uses..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H335: May cause respiratory irritation.
- H350: May cause cancer by inhalation.
- H372: Causes damage to organs (lung) through: prolonged or repeated exposure (via inhalation).
- H373: May cause damage to organs (lungs) through prolonged or repeated exposure (via inhalation).
Precautionary Statements
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P260: Do not breathe dust.
- P264: Wash hands and face thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P284: Wear respiratory protection for particle filtering (at least P3 or N95).
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
COSENTINO GLOBAL, S.L.U.
global supplier
Autovia A-334, salida 60, 04850 Cantoria (Almeria) - Spain
ES
+34 950 444 175
+34 950 444 226
Cosentino UK Ltd.
national supplier
Unit 10 Bartley Point, Osborn Way RG27 9GX, Hook, Hampshire
GB
Cosentino Australia Pty Ltd.
national supplier
270 Beech Road, Casula Nsw 2170
AU
Cosentino Ireland Ltd.
national supplier
Unit 39, Fonthill Industrial Park, Fonthill Road - Dublin 22
IE
C&C North America, Inc
regional supplier
355 Alhambra Circle, Ste. 1000 Coral Gables, FL 33134
US
Cosentino New Zealand Ltd
national supplier
Level 27, Lumley Centre, 88 Shortland Street Auckland Central, Auckland, 1010
NZ
Cosentino South Africa Pty Ltd
national supplier
3 Sandown Valley Crescent, Sandown, Sandton, Gauteng, 2196
ZA
Cosentino Malaysia Sdn. Bhd.
national supplier
Unit 5,05, Level 5, Menara MBMR, No. 1 Jalan Syed Putra, 58000 Kuala Lumpur
MY
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
ChemTel Inc.
+1-813-248-0585
US
24/7/365
multilingual
ChemTel Inc.
1-800-255-3924
US
24/7/365
toll free, multilingual
ChemTel Inc.
1-300-954-583
AU
24/7/365
multilingual
ChemTel Inc.
400-120-0751
CN
24/7/365
multilingual
ChemTel Inc.
000-800-100-4086
IN
24/7/365
multilingual
ChemTel Inc.
01-800-099-0731
MX
24/7/365
multilingual
ChemTel Inc.
0-800-591-6042
BR
24/7/365
multilingual
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
The material is made up of inorganic mineral fillers (85-95%) that include quartz, silica sand, cristobalite, glass, silicon, feldspar and ceramic particles in different proportions depending on the product; it also contains polymerised polyester resin (5-15%), and the rest (<5%) is made up of pigments and additives. Certain products may contain titanium dioxide (TiO2) (0-2.5%).
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Crystalline Silica (SiO): Quartz and cristobalite | N/A | 1-90% | Hazardous |
| Titanium dioxide (TiO) EC: 236-675-5 | 13463-67-7 | 2.5% | Hazardous |
Additional Information
Mixture components subject to occupational exposure limits: Section 8. The full text of the said hazard information is given in Section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Do not inhale dust produced by material processing. If poisoning symptoms appear, move the affected person out of the exposure area and get them some fresh air. Use assisted respiration if the victim is having a serious reaction. Call for medical attention if the symptoms worsen or persist.
Symptoms:
Poisoning symptoms. Cough and difficulty breathing (main symptoms of silicosis). Prolonged contact and/or large-scale inhalation of respirable dust can cause pneumoconiosis, pulmonary fibrosis (silicosis), lung cancer, chronic obstructive pulmonary disease and kidney disease.
Skin Contact
Wash thoroughly with soap and water.
Eye Contact
Rinse eyes with plenty of room-temperature water for at least 15 minutes. Prevent the affected person from rubbing or closing their eyes. If the victim wears contact lenses, these should be removed unless stuck to the eyes, as failure to do so may cause additional injury. Call for medical attention if the symptoms worsen or persist.
Ingestion/Swallowing
Do not give the victim anything to drink if they are unconscious.
Immediate Medical Attention Required
Call for medical attention if the symptoms worsen or persist (for inhalation and eye contact). If uncertain or if symptoms persist, seek medical attention. If there is any concern or if an illness persists, call a doctor and show them the SDS for this product.
Medical Treatment
Use assisted respiration if the victim is having a serious reaction. If uncertain or if symptoms persist, seek medical attention.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Reduce the generation of airborne dust as much as possible. Use closed areas for processing, local exhaust venting or other technical controls to keep the particle concentration in the air below the exposure limits specified by applicable regulations. If user operations create dust, smoke or vapour, use a ventilation system to ensure that exposure to airborne particles is below the exposure limit.
Hand Protection
Use of mechanical protection gloves is recommended to prevent being cut by pieces during handling.
Eye Protection
The use of eye protection is recommended in accordance with EN166:2001, Occupational Safety and Health Standard OSHA 29 CFR 1910.133, or equivalent protection that complies with applicable relevant local regulation.
Respiratory Protection
Suitable respiratory protective equipment with a particle filter as per Regulation EN 143:2001 and its revisions EN 143/AC 2002, EN 143/AC 2005 (type P3), or N95, R95, P95 or superior according to Occupational Safety and Health Standard OSHA 29 CFR 1910.134, approved by NIOSH, P1, P2 protection or higher according to Australian AS/NZS 1716), or equivalent protection that complies with relevant applicable local law. Use appropriate respiratory protection even when working with water as a dust reduction measure when processing Silestone, Silestone Integrity, N-BOOST by Silestone or ECO by Cosentino.
Skin/Body Protection
Skin protection is not needed, but the use of work clothing that prevents dust from coming into contact with skin is recommended. Wash hands and face with soap and water to remove dust from processing before work breaks and at the end of shifts. When processing Silestone, Silestone Integrity, N-BOOST by Silestone or ECO by Cosentino, wear work clothing made of a fabric that does not trap dust. Do not clean using compressed air; use vacuum cleaning methods. Wear rubber boots if work is to be performed in wet areas during water processing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology.?
The signal word for this substance is "danger".
What is the physical form of ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology.?
ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology. is a solid with by line color. It has odourless odor.
What is ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology. used for?
Construction and decoration surface intended for indoor use, primarily as a worktop in kitchens and baths, flooring, sinks, shower trays, wall panelling, and other similar uses.
What are the hazard statements for ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology.?
This substance has 4 hazard statements: H335: May cause respiratory irritation. H350: May cause cancer by inhalation. H372: Causes damage to organs (lung) through: prolonged or repeated exposure (via inhalation). H373: May cause damage to organs (lungs) through prolonged or repeated exposure (via inhalation).
What is the melting point of ECO by Cosentino (includes entire product family). Including products with HybriQ+ and HybriQ Technology.?
The melting point is N/A* and the boiling point is N/A*.