Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Rust Seal is a viscous liquid. substance commonly used professional use; anti corrosion products.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P102: Keep out of reach of children.
- P273: Avoid release to the environment.
- P501: Dispose of contents/container to a hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
CRC Industries Europe B.V.
undefined
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+32(0)52/45.60.11
BE
9-17h CET
Centre Anti-Poisons/Antigifcentrum
+32 70 245 245
BE
24/7
Please dial: 070 245 245 for any urgent questions about intoxication (free of charge 24/7)
Centre Anti-Poisons/Antigifcentrum
02 264 96 30
BE
if not accessible, dial: 02 264 96 30 (standard fee)
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dipropylene glycol methyl ether EC: 252-104-2 | 34590-94-8 | 2.5% | Non-hazardous |
| Amines, tallow alkyl, ethoxylated | 61791-26-2 | 0.25-1% | Hazardous |
| 3-aminopropyltriethoxysilane EC: 213-048-4 | 919-30-2 | 0.1-1% | Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Remove person to fresh air and keep comfortable for breathing. If signs/symptoms develop, get medical attention.
Skin Contact
Wash skin with plenty of water. Seek medical attention if irritation develops.
Symptoms:
irritation
Eye Contact
Rinse eyes with water as a precaution. Seek medical attention if irritation develops.
Symptoms:
irritation
Ingestion/Swallowing
Call a poison center or a doctor if you feel unwell.
Symptoms:
unwell
Medical Treatment
Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
Suitable Extinguishing Media
Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable Extinguishing Media
Do not use a heavy water stream.
Fire Fighting Instructions
Move containers from fire area if it can be done without personal risk. Use standard firefighting procedures and consider the hazards of other involved materials.
Firefighter Protection Equipment
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
Emergency Procedures
Ventilate spillage area. Evacuate unnecessary personnel. Ventilate area.
Small Spill Procedures
Take up small spills with dry chemical absorbent.
Large Spill Procedures
For large spills, confine the spill in a dike and charge it with wet sand or earth for subsequent safe disposal. Following product recovery, flush area with water.
Environmental Precautions
Avoid release to the environment. Avoid the spillage or runoff entering drains, sewers or watercourses.
Cleanup Methods
For large spills, confine the spill in a dike and charge it with wet sand or earth for subsequent safe disposal. Following product recovery, flush area with water. Take up small spills with dry chemical absorbent. Clean surface thoroughly to remove residual contamination.
Cleanup Materials:
wet sand or earth, dry chemical absorbent
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
Handling Precautions
• Wear personal protective equipment.
• Ensure good ventilation of the work station.
• Avoid prolonged exposure.
• Handle in accordance with good industrial hygiene and safety procedures.
Storage Conditions
• Store in a well-ventilated place.
• Keep cool.
• Keep container closed when not in use.
General Hygiene Measures
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Good general ventilation should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Hand Protection
Wear suitable gloves tested to EN374. The breakthrough time of the glove should be longer than the total duration of product use. If work lasts longer than the breakthrough time, gloves should be changed part-way through. Nitrile gloves are recommended.
Eye Protection
Use eye protection according to EN 166. Safety glasses with side shields.
Respiratory Protection
In case of insufficient ventilation, wear suitable respiratory equipment. Approved organic vapour respirator. Filter type: A
Skin/Body Protection
Wear suitable protective clothing
Environmental Exposure Controls
Avoid release to the environment. Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
Chemical Stability
Stable under normal conditions.
Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
Hazardous Reactions
No dangerous reactions known under normal conditions of use.
Conditions to Avoid
None under recommended storage and handling conditions (see section 7). Avoid temperatures exceeding the flash point.
Incompatible Materials
Strong oxidizing agents.
Hazardous Decomposition Products
Under normal conditions of storage and use, hazardous decomposition products should not be produced. Carbon oxides (CO, CO2).
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Rust Seal?
The signal word for this substance is "no signal word".
What is the physical form of Rust Seal?
Rust Seal is a liquid appearing as viscous liquid. with black. color. It has neutral. odor.
What is the solubility of Rust Seal?
soluble in water.
What is Rust Seal used for?
Professional use; Anti Corrosion Products
What are the hazard statements for Rust Seal?
This substance has 1 hazard statements: H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Rust Seal?
The melting point is Not applicable and the boiling point is 100 °C.