Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP)
- Product Code
- C169.5CP
- Chemical Name
- Zinc Zn
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- A registration number is not available for this substance as the substance or its uses are exempted for registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Laboratory Reagent
Manufacturers & Suppliers
CPAchem Ltd.
manufacturer
2 Ivanka Terzieva Str. Bogomilovo 6065 Stara Zagora, BULGARIA
+359 42952901
Emergency Contacts
Austria
+43 1 31304 5620
Belgium
+32022649636
Bulgaria
+359 2 9154 409
Croatia
+38514686910
Cyprus
+3572240561
Czech Republic
+420267082257
Denmark
+45 72 54 40 00
Estonia
+3726943384
Finland
+358 5052 000
France
+33 3 85 21 92
Germany
+49-30-18412-0
Greece
+302106479250
Hungary
+34 (1) 476 1136
Ireland
+35318092566
Italy
+390649906140
Latvia
+371 67032600
Lithuania
+370 70662008
Luxembourg
+352 24785551
Netherland
+31 88 75 585 61
Norway
+47 21 07 70 00
Poland
+48 42 2530 400
Portugal
+351213303271
Romania
+40213183606
Slovakia
+421 2 5465 2307
Slovenia
+38614006039
Spain
+34 917689800
Sweden
+46104566750
United Kingdom (England or Wales)
0845 46 47
United Kingdom (Scotland)
08454 24 24 24 (UK only)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. Then consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
Use fire extinguishing methods suitable to surrounding conditions.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
None.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation - Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. - Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3264
- Shipping Name
- CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (HYDROCHLORIC ACID, ZINC CHLORIDE)
- Transport Class
- 8 Corrosive substances.
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP)?
The signal word is warning.
What is the physical form of Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP)?
Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP) is a fluid appearing as fluid with according to product specification color. It has characteristic odor.
What is Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP) used for?
Laboratory Reagent
What are the hazard statements for Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP)?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Zinc Zn - 10 g/l in diluted HCl for ICP (C169.5CP)?
The melting point is Undetermined. and the boiling point is 100 – 110 °C.