1-Methoxy-2-propanol ≥99 %, for synthesis

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse skin with water/shower. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse cautiously with water for several minutes. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse mouth. Call a doctor if you feel unwell.

water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)

water jet

Combustible. In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures. Vapours are heavier than air, spread along floors and form explosive mixtures with air. Vapours may form explosive mixtures with air.

Fight fire with normal precautions from a reasonable distance.

Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray. Avoidance of ignition sources.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents). Place in appropriate containers for disposal.

Materials: liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents)

Provision of sufficient ventilation. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge.

Keep container tightly closed. Recommended storage temperature: 15 – 25 °C

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs. When using do not smoke.

Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 °C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber). Material thickness: >0,11 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).

Use safety goggle with side protection.

Respiratory protection necessary at: Aerosol or mist formation. Type: A (against organic gases and vapours with a boiling point of > 65 °C, colour code: Brown).

Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

It's a reactive substance. Risk of ignition. If heated Risk of ignition. Vapours may form explosive mixtures with air.

Violent reaction with: strong oxidiser

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

There is no additional information.

Hazardous combustion products: see section 5.

Provisions for dangerous goods (ADR) should be complied within the premises.