NextSDS Logo
Safety Data Sheet EN

FT2578880025 CathoGuard 800 RE 25KG

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FT2578880025 CathoGuard 800 RE 25KG
Product Code
FT2578880025

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Coatings and related products

Manufacturers & Suppliers

B

BASF Coatings GmbH

manufacturer

Postfach 6123, 48136 Muenster, Deutschland

+49/2501/143688

Emergency Contacts

International emergency number

+49 180 2273-112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1A
Aquatic Acute Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.
H402 Harmful to aquatic life.

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing and eye protection or face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P501 Dispose of contents and container to hazardous or special waste collection point.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

fillers, polyether, Epoxy resin derivative, Water, organic solvent, pigment, polyurethane

Chemical Name CAS Number Concentration Hazardous
mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) 55965-84-9 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the affected individual into fresh air and keep the person calm. If symptoms persist, seek medical advice. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

If symptoms persist, seek medical advice. Remove contaminated clothing. Wash skin with soap and water, rinse abundantly. Do NOT use solvents or thinners.

Eye contact

If symptoms persist, seek medical advice. Contact lenses should be removed. Hold eyelids open and flush with copious amounts of clean, fresh water or a special eyewash solution.

Ingestion

Do not induce vomiting. Rinse mouth thoroughly with water, seek medical attention. If adverse health effects develop seek medical attention.

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical attention.

Medical Treatment

Symptomatic treatment (decontamination, vital functions).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

carbon dioxide, alcohol-resistant foam, dry powder, water spray

Unsuitable media

water jet

Specific hazards

Hazardous decomposition products formed under fire conditions.

Instructions

Cool closed containers in the vicinity of the source of fire.

Firefighter Protection

Appropriate breathing apparatus may be required.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid breathing vapours. For non-emergency personnel: Use personal protective clothing. Ensure adequate ventilation. Keep away from sources of ignition. For emergency responders: Advice on product handling can be found in sections 7 and 8 of this safety data sheet. Information regarding personal protective measures, see section 8.

Environmental

Do not allow to enter drains or waterways. Do not discharge into the subsoil/soil.

Cleanup methods

Clean preferably with a detergent; avoid the use of solvents.

Materials: detergent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Provide good ventilation of working area (local exhaust ventilation if necessary). Do not return residues to the storage containers. Smoking, eating and drinking are forbidden in application area. For personal protection see section 8. Comply with the health and safety at work laws. Avoid inhalation of vapour and spray mist. The workplace should be equipped with an emergency shower and eye-rinsing facility. Avoid contact with the skin, eyes and clothing. Handle in accordance with good industrial hygiene and safety practice.

Storage

Keep container dry. Keep away from heat. Keep in a cool, well-ventilated place. Avoid direct sunlight. Close containers carefully once opened and store them upright in order to prevent any leakage. No smoking. No admission for unauthorised personnel. Always keep in containers of same material as the original one. Observe label precautions. Store protected against freezing.

Hygiene

Smoking, eating and drinking are forbidden in application area. Handle in accordance with good industrial hygiene and safety practice.

Fire prevention

Avoid all sources of ignition: heat, sparks, open flame. The relevant fire protection measures should be noted.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation. This can be achieved by the use of local exhaust ventilation and good general extraction.

Hands

Wear protective gloves. Any chemical protection glove certified according to EN ISO 374-1 is suitable: e.g. butyl rubber gloves - material thickness: 0.5 mm. Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): Suitable materials for short-term contact (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN ISO 374-1) Suitable materials against splashes (recommended: At least protective index 1, corresponding > 10 minutes of permeation time according to EN ISO 374-1). Follow manufacturer's advice on use, storage, maintenance and replacement of gloves. The gloves should be replaced immediately in case of damage or signs of wear. It is recommended to use preventative skin protection (skin cream).

Eyes

Safety glasses with side-shields (frame goggles) (e.g. EN 166), Required when there is a risk of eye contact.

Respiratory

Wear respiratory protection if ventilation is inadequate. When workers are facing concentrations above the occupational exposure limits they must use appropriate certified respirators. Use A1P2 breathing-protection half mask in case of contact with aerosols.

Skin/Body

chemical-resistant disposable coveralls, Personnel should wear antistatic, flame-retardant clothing made of natural fibres and/or heat-resistant synthetic fibres.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Decomposition Temperature
---
Dynamic Viscosity
---
Voc Content
---
Solubility In Water
not determined
Relative Density
---
Physical State Data
liquid
Explosive Limits
---
Properties Status
---
Kinematic Viscosity
7,3 mm2/s (20 °C)
Solubility
---
Freezing Point
---
Vapor Pressure
24,00 hPa (20 °C); 126,00 hPa (50 °C)
Crystallisation Point
---
Odor
ketone-like
Appearance
---
Cloud Point
---
Form
---
Lower Explosive Limit
36 g/m3
Bulk Density
---
Solubility In Fat
---
Melting Point
not determined
Molecular Weight
---
Upper Explosive Limit
not determined
Metal Corrosion
---
Colour Intensity
---
Density
1,046 g/cm3 (20 °C)
Ph
5,4 - 5,8
Flammability
hardly combustible
Softening Point
---
Partition Coefficient
not applicable for mixtures
Evaporation Rate
not determined
State Under Standard Conditions
---
Relative Evaporation Rate
---
Vapor Density
---
Auto Ignition Temperature
> 200 °C
Colour
grey
Boiling Point
94 °C
Physical State
liquid
Odor Threshold
not determined
Solidification Point
---
Flash Point
95 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable if stored and handled as prescribed/indicated.

Reactivity

No hazardous reactions if stored and handled as prescribed/indicated.

Hazardous reactions

No hazardous reactions when stored and handled according to instructions.

Avoid

Avoid heat. Avoid direct sunlight. Avoid freezing.

Incompatible

Keep away from highly acidic or alkaline substances as well as oxidants in order to prevent exothermal reactions.

Decomposition

When exposed to high temperatures hazardous decomposition products such as smoke, carbon monoxide, carbon dioxide, oxides of nitrogen, hydrogen cyanide, monomeric isocyanates may be produced., No hazardous decomposition products if stored and handled as prescribed/indicated.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FT2578880025 CathoGuard 800 RE 25KG?

The signal word is warning.

What is the physical form of FT2578880025 CathoGuard 800 RE 25KG?

FT2578880025 CathoGuard 800 RE 25KG is a liquid with grey color. It has ketone-like odor.

What is FT2578880025 CathoGuard 800 RE 25KG used for?

Coatings and related products

What are the hazard statements for FT2578880025 CathoGuard 800 RE 25KG?

This substance has 2 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H402: Harmful to aquatic life.

What is the melting point of FT2578880025 CathoGuard 800 RE 25KG?

The melting point is not determined and the boiling point is 94 °C.