Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
European Community number - used for regulatory compliance in EU/EEA
Uses Information
Overview
Sodium cyanide (CAS: 143-33-9 ) commonly used su24 scientific research and development.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS06
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H290: May be corrosive to metals.
- H300 + H310 + H330: Fatal if swallowed, in contact with skin or if inhaled.
- H372: Causes damage to the thyroid through prolonged or repeated exposure.
Precautionary Statements
- P260: Do not breathe dust/fume/gas/mist/vapors/spray.
- P284: [In case of inadequate ventilation] wear respiratory protection.
- P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
- P320: Specific treatment is urgent (see on this label).
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
(800) 343-0660
US
Monday-Friday, 8am-7pm EST
During normal business hours
Carechem 24
(866) 928-0789
US
After normal business hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
SubstancesChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium cyanide EC: 205-599-4 | 143-33-9 | 100% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Symptoms:
Fatal if inhaled.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Symptoms:
Fatal in contact with skin.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
Do not induce vomiting; immediately call for medical help.
Symptoms:
Fatal if swallowed.
🚨 Immediate Medical Attention Required
No further relevant information available.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
🧤 Hand Protection
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material (in minutes): 480. Glove thickness: 0.11 mm.
👁️ Eye Protection
Safety glasses with side shields / NIOSH (US) or EN 166(EU)
😷 Respiratory Protection
Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.
🦺 Skin/Body Protection
Protective work clothing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1689
📦 Proper Shipping Name
Sodium cyanide, solid
⚠️ Transport Hazard Class
6.1 Toxic substances
📋 Packing Group
I
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Sodium cyanide?
The signal word for this substance is "danger".
What is Sodium cyanide used for?
SU24 Scientific research and development
What are the hazard statements for Sodium cyanide?
This substance has 3 hazard statements: H290: May be corrosive to metals. H300 + H310 + H330: Fatal if swallowed, in contact with skin or if inhaled. H372: Causes damage to the thyroid through prolonged or repeated exposure.
What is the melting point of Sodium cyanide?
The melting point is 563 C (1045 F) and the boiling point is ca 1500 C (ca 2732 F).