NextSDS Logo
Safety Data Sheet NL

GRF SPRAY Lijmspray ADHESIVE AE 500ML*12

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GRF SPRAY Lijmspray ADHESIVE AE 500ML*12
Product Form
Lijmspray
Product Code
L221

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Kleefstof

Manufacturers & Suppliers

B

Bison International

manufacturer

Dr.A.F.Philipsstraat 9 NL-4462 EW Goes PO Box 160 NL-4460 AD Goes

+31 88 3235700

B

Bison International

manufacturer

Excelsiorlaan 27, B 3 B-1930 Zaventem

+32 3 710 92 92

Emergency Contacts

Antigifcentrum

070 245245

Groothertogdom Luxemburg

8002 - 5500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aquatic Chronic Cat. 2 H411
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
H315 Veroorzaakt huidirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H411 Giftig voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P261 Inademing van spuitnevel vermijden.
P302 + P352 BIJ CONTACT MET DE HUID: Met veel water wassen.
P410 + P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 C/122 F.
P501 De inhoud/verpakking afvoeren overeenkomstig de nationale voorschriften.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Kleefstof

Chemical Name CAS Number Concentration Hazardous
dimthyl ther EC: 204-065-8 115-10-6 25 - 50% Yes
Koolwaterstoffen, C6-C7, isoalkanen, cyclisch, <5% n-hexaan EC: 926-605-8 --- 10 - 25% Yes
Koolwaterstoffen, C6, isoalkanen, <5% n-hexaan EC: 931-254-9 --- 10 - 25% Yes
Koolwaterstoffen, C6-C7, n-alkanen, isoalkanen, cyclische verbindingen, <5% n-hexaan EC: 921-024-6 --- 2.5 - 10% Yes
Koolwaterstoffen, C7, n-alkanen, isoalkanen, cycli EC: 927-510-4 --- 2.5 - 10% Yes
Cyclohexane stof waarvoor binnen de Gemeenschap een blootstellingsgrens op de werkvloer geldt EC: 203-806-2 110-82-7 2.5 - 10% Yes
Hexane (mixture of isomers) EC: 203-777-6 110-54-3 1 - 2.5% Yes

De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij bewusteloosheid ligging en vervoer in stabiele zijligging.

Skin contact

Onmiddellijk met water en zeep afwassen en goed naspoelen.

Eye contact

Ogen bij geopend ooglid meerdere minuten met stromend water spoelen

Ingestion

Als de klachten niet minderen, een arts raadplegen

Immediate Medical Attention

Geen verdere relevante informatie verkrijgbaar.

Medical Treatment

Geen verdere relevante informatie verkrijgbaar.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Veiligheidshandschoenen. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Aanbevolen materiaaldikte : > 0,12 mm. Nitrilrubber. Voor het mengsel van de hieronder vermelde chemicalin moet de penetratietijd minstens 10 minuten bedragen (permeatie volgens EN 374 Deel 3: Level 1).

Respiratory

Bij onvoldoende ventilatie ademhalingsbescherming. Aanbevolen filter voor kortstondig gebruik: Filter A

Skin/Body

Draag geschikte beschermende kleding

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Upper Explosive Limit
18,6 Vol %
Density
~0,773 g/cm
Explosive Limits
---
Physical State Data
aerosol
Dynamic Viscosity
Niet bepaald.
Flammability
Niet bruikbaar.
Colour
Volgens de produktbeschrijving
Relative Evaporation Rate
---
Solubility
---
Vapor Density
Niet bepaald.
Partition Coefficient
Niet bepaald.
Solubility In Water
Niet resp. gering mengbaar.
Decomposition Temperature
Niet bepaald.
Physical State
Aerosol
Evaporation Rate
Niet bruikbaar.
Appearance
---
Bulk Density
---
Auto Ignition Temperature
235 C
Cloud Point
---
Solidification Point
---
Metal Corrosion
Niet van toepassing
Molecular Weight
---
Kinematic Viscosity
Niet bepaald.
Solubility In Fat
---
Relative Density
Niet bepaald.
Freezing Point
Niet bepaald.
Colour Intensity
---
Flash Point
-42 C
Melting Point
Niet bepaald.
Boiling Point
60 C
Voc Content
88,64 %
Form
Aerosol
Ph
Het mengsel is een gas.
Odor
Karakteristiek
Vapor Pressure
5200 hPa
Odor Threshold
Niet bepaald.
Lower Explosive Limit
0,7 Vol %
Softening Point
---
Properties Status
---
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
Niet van toepassing
ADR

Symbool (vis en boom)

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GRF SPRAY Lijmspray ADHESIVE AE 500ML*12?

The signal word is danger.

What is the physical form of GRF SPRAY Lijmspray ADHESIVE AE 500ML*12?

GRF SPRAY Lijmspray ADHESIVE AE 500ML*12 is a aerosol with volgens de produktbeschrijving color. It has karakteristiek odor.

What is GRF SPRAY Lijmspray ADHESIVE AE 500ML*12 used for?

Kleefstof

What are the hazard statements for GRF SPRAY Lijmspray ADHESIVE AE 500ML*12?

This substance has 4 hazard statements:

  • H222: Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H411: Giftig voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of GRF SPRAY Lijmspray ADHESIVE AE 500ML*12?

The melting point is Niet bepaald. and the boiling point is 60 C.

Compliance Scanner

Scan your compliance