Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium chloro(tosyl)amide
- Product Code
- 099856
Regulatory Identifiers
- CAS Number
- 127-65-1 Check regulations →
Manufacturers & Suppliers
Matrix Scientific
manufacturer
131 Pontiac Business Center Drive, Elgin, SC 29045, USA
(803)788-9494
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium chloro(tosyl)amide | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim from the source of exposure to fresh, uncontaminated air. If victim's breathing is difficult, administer oxygen. Seek medical attention.
After contact with skin, wash with generous quantities of running water. Gently and thoroughly wash affected area with running water and non-abrasive soap. Cool water may be used. Cover the affected area with emollient. Seek medical attention. Wash any contaminated clothing prior to reusing.
Check for and remove any contact lenses. Immediately flush eyes with clean, running water for at least 15 minutes while keeping eyes open. Cool water may be used. Seek medical attention.
Do NOT induce vomiting. Give water to victim to drink. Seek medical attention.
Immediate Medical Attention
Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemical powder, alcohol or polymer foam.
Emits toxic fumes under fire conditions.
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear Appropriate respirator, impervious boots and heavy rubber (or otherwise impervious) gloves. Scoop up solid material or absorb liquid material and place into appropriate container. Ventilate area and wash affected spill area after pickup is complete. Wash skin immediately with plenty of water. Place solid or absorbed material into containers and close for disposal.
Scoop up solid material or absorb liquid material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged exposure. Use caution when handling. Exposure to any chemical should be limited. Do not breath dust or vapor. Do not get in eyes, on skin or on clothing.
Store in Freezer. Store in a cool, dry, well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure ventilation during use.
Wear chemical-resistant gloves.
Wear Protective safety goggles.
Wear protective clothing and chemical resistant boots.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Strong oxidizing agents, Strong acids and bases
Carbon: carbon monoxide, carbon dioxide; Chlorine: hydrogen chloride; Nitrogen: oxides of nitrogen; Sulfur: oxides of sulfur
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dissolve or mix the material with a combustible solvent and burn in a regulated, chemical incinerator equipped with after burner and scrubber.
Dissolve or mix the material with a combustible solvent and burn in a regulated, chemical incinerator equipped with after burner and scrubber.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Adhere to all Federal, State and local regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium chloro(tosyl)amide?
The signal word is warning.
What is the physical form of Sodium chloro(tosyl)amide?
Sodium chloro(tosyl)amide is a solid appearing as solid .
What are the hazard statements for Sodium chloro(tosyl)amide?
This substance has 2 hazard statements:
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
What is the melting point of Sodium chloro(tosyl)amide?
The melting point is 167-170°C .