Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Belt Grip (FOOD PROCESSING SAFE®)
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives
Manufacturers & Suppliers
CRC Industries Europe bvba
manufacturer
Touwslagerstraat 1 9240 Zele Belgium
CRC Industries Finland Oy
national supplier
Laurinkatu 57 A 23 B, 08100 Lohja
+358/(19)32.921
CRC Industries France
national supplier
6, avenue du marais, C.S. 90028, 95102 Argenteuil Cedex
01.34.11.20.00
CRC Industries Deutschland GmbH
national supplier
Südring 9, D-76473 Iffezheim
(07229) 303 0
CRC INDUSTRIES IBERIA S.L.U.
national supplier
GREMIO DEL CUERO-PARC.96, POLIGONO INDUSTR. DE HONTORIA, 40195 SEGOVIA
0034/921.427.546
CRC Industries Sweden
national supplier
Laxfiskevägen 16, 433 38 Partille
0046/31 706 84 80
Emergency Contacts
CRC Industries Europe
+32(0)52/45.60.11
(office hours)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons,C3-4-rich, petroleum distillate Petroleumgas (1,3-butadiene < 0.1%) EC: 270-990-9 | 68512-91-4 | 25 - 50% | Yes |
| N/A | --- | 25 - 50% | Yes |
Notes
G : exempted from the obligation to register in accordance with art.2(7)of REACH Regulation No 1907/2006 K : not classified as carcinogen, less than 0.1% w/w 1,3-butadiene (Einecs-nr. 203-450-8) Q : The CAS-no is only an indicative identifier to be used outside the EU for global inventory entries. (* Explanation phrases : see chapter 16)
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
Symptoms: Excessive inhalation of solvent vapours may give rise to nausea, headaches and dizziness.
Take off contaminated clothing and wash before reuse. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention.
Symptoms: Irritating to skin. Symptoms: redness and pain.
If substance has got into eyes, immediately wash out with plenty of water. If eye irritation persists: Get medical advice/attention.
Symptoms: May cause irritation. Symptoms: redness and pain.
If swallowed do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention.
Symptoms: After vomiting of swallowed product aspiration into lungs is likely. Solvents may induce chemical pneumonia. Symptoms: sore throat, abdominal pain, nausea, vomiting.
Immediate Medical Attention
If aspiration is suspected obtain immediate medical attention. If eye irritation persists: Get medical advice/attention. If skin irritation occurs: Get medical advice/attention. Call a POISON CENTER or doctor/physician if you feel unwell. If symptoms persist always call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Shut off all ignition sources Ensure adequate ventilation Wear suitable protective clothing and gloves.
Do not allow to enter public sewers and watercourses
Absorb spillage
Materials: suitable inert material
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition Take precautionary measures against static discharges Do not breathe aerosols or vapours. Ensure adequate ventilation Avoid contact with skin and eyes. Wash thoroughly after use Wear protective gloves/protective clothing/eye protection/face protection.
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Keep out of reach of children.
Wash thoroughly after use
Keep away from heat and sources of ignition Take precautionary measures against static discharges
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Keep away from heat and sources of ignition. Take precautionary measures against static discharges.
When handling the product wear chemical-resistant gloves (standard EN 374). Use a reusable glove with a minimum breakthrough time of 30 minutes. The breakthrough time of the glove should be longer than the total duration of product use. If work lasts longer than the breakthrough time, gloves should be changed part-way through. Recommended gloves: (neoprene).
Wear safety eyewear according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment. Recommended respiratory protection: Air purifying respirator equiped with organic gas/vapor cartridge (type AX).
Avoid release to the environment. Collect spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Avoid overheating
Strong oxidising agent
CO,CO2
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
This material and its container must be disposed of in a safe way. Disposal should be in accordance with local, state or national legislation
Do not discharge into drains or the environment, dispose to an authorised waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS (naphta's)
- Transport Class
- 2.1
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The Safety Data Sheet is compiled according to the current European requirements.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Belt Grip (FOOD PROCESSING SAFE®)?
The signal word is danger.
What is the physical form of Belt Grip (FOOD PROCESSING SAFE®)?
Belt Grip (FOOD PROCESSING SAFE®) is a propane/butane propelled liquid. appearing as colorless. with colorless. color. It has characteristic odor. odor.
What is Belt Grip (FOOD PROCESSING SAFE®) used for?
Adhesives
What are the hazard statements for Belt Grip (FOOD PROCESSING SAFE®)?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.