Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SURFABAC DR19a
- Product Code
- PI199615
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
MONDO SPECHIM S.A.
manufacturer
Chaussée de Tirlemont 75A, 5030 Gembloux
081830083
https://www.mondo-spechim.eu/
Emergency Contacts
Emergency Contact
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isotridecanol, ethoxylated | 69011-36-5 | 6% | Yes |
| Didecyldimethylammoniumchloride EC: 230-525-2 | 7173-51-5 | 5% | Yes |
| tetrasodium ethylenediaminetetraacetate EC: 200-573-9 | 64-02-8 | 3% | Yes |
| Isopropanol EC: 200-661-7 | 67-63-0 | 2% | Yes |
| Sodium carbonate EC: 207-838-8 | 497-19-8 | 1% | Yes |
| Disodium metasilicate EC: 229-912-9 | --- | 0.3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Let sit upright, fresh air, rest and take to hospital.
Remove contaminated clothing, rinse skin with plenty of water and immediately transport to hospital.
Symptoms: Redness, pain
Thoroughly rinse with water (contact lenses to be removed if this is easily done) then take to physician.
Symptoms: Caustic, redness, blurred vision, pain
Rinse mouth, do not induce vomiting, take to hospital immediately.
Symptoms: Diarrhoea, headache, abdominal cramps, sleepiness, vomiting
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with sufficient exhaust ventilation.
Handling with nitril-gloves (EN 374). Breakthrough time: >480 Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station.
Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.
If necessary, use an air-purifying face mask in case of respiratory hazards. Use the ABEK type as protection against these troublesome levels.
Wear impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1719
- Shipping Name
- Caustic alkali liquid, n.o.s. (mixture with tetrasodium ethylenediaminetetraacetate)
- Transport Class
- 8
- Packing Group
- III
Risk of burns. Risk to the aquatic environment and the sewerage system.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SURFABAC DR19a?
The signal word is danger.
What is the physical form of SURFABAC DR19a?
SURFABAC DR19a is a liquid appearing as liquid . It has characteristic odor.
What are the hazard statements for SURFABAC DR19a?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of SURFABAC DR19a?
The melting point is 0 C and the boiling point is 78 C 100 C.