Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Copper standard 1000 mg Cu, (CuCl in HO) Titrisol commonly used reagent for analysis.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements
- P273: Avoid release to the environment.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureGeneral Composition
Aqueous solution
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| copper(II) chloride | 7447-39-4 | 3-5% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
fresh air.
🖐️ Skin Contact
wash off with plenty of water. Remove contaminated clothing.
👁️ Eye Contact
rinse out with plenty of water.
🍽️ Ingestion/Swallowing
make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Symptoms:
irritant effects, Diarrhoea, Vomiting, Headache
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.
🧤 Hand Protection
full contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min splash contact: Glove material: Nitrile rubber Glove thickness: 0,11 mm Break through time: - 480 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 741 Dermatril L (full contact), KCL 741 Dermatril L (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet<,> supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
👁️ Eye Protection
Safety glasses
😷 Respiratory Protection
required when vapours/aerosols are generated. Recommended Filter type: Filter B (acc. to DIN 3181) for inorganic gases and vapours The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
🦺 Skin/Body Protection
Protective clothing needs to be selected specifically for the workplace, depending on concentrations and quantities of the hazardous substances handled. The chemical resistance of the protective equipment should be enquired at the respective supplier.
🌍 Environmental Exposure Controls
Do not let product enter drains.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 3082
📦 Proper Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (COPPER CHLORIDE SOLUTION)
⚠️ Transport Hazard Class
9
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Copper standard 1000 mg Cu, (CuCl in HO) Titrisol?
The signal word for this substance is "warning".
What is the physical form of Copper standard 1000 mg Cu, (CuCl in HO) Titrisol?
Copper standard 1000 mg Cu, (CuCl in HO) Titrisol is a liquid with blue color. It has odourless odor.
What is Copper standard 1000 mg Cu, (CuCl in HO) Titrisol used for?
Reagent for analysis
What are the hazard statements for Copper standard 1000 mg Cu, (CuCl in HO) Titrisol?
This substance has 1 hazard statements: H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Copper standard 1000 mg Cu, (CuCl in HO) Titrisol?
The melting point is No information available. and the boiling point is No information available..